Abstract:Calculation of surface electric field of key part of the DC power transmission system is important for prevention of surface discharge of the converter valve tower and control of surface field intensity; the field intensity calculation results were proposed under different schemes and the optimized positions and the structural parameters of the grading ring were validated in this article by analyzing calculation of the surface field intensity of the key part of the idealized DC power transmission converter system model by boundary element method in numerical calculation of electromagnetic field. By calculating the surface field intensity of the valve box structure without grading ring and the surface field intensity of the whole structure to which the grading ring was applied respectively and analyzing the effects of the position and the distance between grading rings to the surface Electric Field Intensity of the valve structure specifically, wherein the comparison was implemented as well to explain that the greater the distance among the external grading rings of the converter valve structure was, the greater the field intensity at the middle point on the edge corresponding to the valve box structure would be; and the surface field intensity of the corner part corresponding to the valve box model was reduced significantly as a result of application of the grading ring. That whether the parameters, such as the dimensions of the grading ring, the distance, etc. after being changed meet the requirement of shielding were studied thoroughly by calculating the surface field intensity of key part of the converter valve in the actual power transmission project,the calculating models of the valve module and the column structure of the transverse plate were proposed to take into account after adjusting the structure of the shielding system; the surface field of the key part in the valve tower structure was analyzed in accordance with the method of applying the voltage; the inexistence of corona phenomenon was validated and the laws were summarized; and the insulating feasibility of the shielding system in the practical project was verified. Moreover, the reference basis could be provided for designing and planning of the grading ring of the DC power transmission converter valve in the design scheme in the article.

Electric Field Calculation and Optimization of the UHVDC Converter Valve Shield Case

Electric Field Simulation and Comparison of Shielding Apparatus on Typical Types of UHVDC Converter Valve Units

E-Field Distribution Analysis On Three Types Of Converter Double Valve In 800kv Valve Hall

Calculation of Electric Field Distribution along Composite Insulator Strings and Design of Grading Ring of UHVDC Transmission Line

Simulation Analysis and Improvement Design of Electric Field Distribution for Shielding Device in UHV Converter Station Indoor DC Yard

Electric Field Evaluation of &#x00b1;400kv Converter Quadrivalve Corona Shields in High Altitude Area

Electrical field calculation and optimization of suspension insulator with cone conformation in valve hall

Distributed Parallel Computation of the 3D Electric Field in the HVDC Converter Valve Hall

Calculation and Optimization of Four Splitting Spacers and Fittings in ± 800kv HVDC-Flexible Low Voltage Valve Hall

Research on the Electric Field Distribution of Multilayer Dielectric under AC-DC Composite Voltage

Electric Field Distribution and Optimization of a Bipolar UHVDC Voltage Generator

Electric Field Evaluation And Optimization Of Shielding Electrodes For High Voltage Apparatus In +/- 1100 Kv Indoor Dc Yard

Calculation and Analysis of Surface Electric Field Intensity of Key Part in DC Power Transmission System

Electric Field Evaluation and Optimization of Connecting Electrodes in Full-Scale Indoor VSC-HVDC Converter Station

Simulation and Optimization Design of Isolating Switch in the Indoor DC Yard of ±1100kv Converter Station

Methodology and Strategy on the Calculation of 3D Electric Field on Shielding Rings of UHV DC Transmission Lines

Study and design of main circuit parameters for ±800 kv/7500 MW DC power transmission project from Xiluodu to Zhexi

Calculation of Ground-Level Electric Field and Ion Flow of HVDC Transmission Lines With Shield Wires

Research on the dynamic characteristics of electric field distribution of the ± 1100 kV Ultra high voltage converter transformer valve‐side bushing using weakly ionised gas conductance model

Full-field Simulation of ±800kv Valve Hall in Flexible DC System

Research on Converter Valve Overvoltage Mechanism and Calculation Conditions of ± 800 Kv Converter Station