Abstract:Finite element analyses of oxygen diffusion at the grain level have been carried out for a polycrystalline nickel-based superalloy, aiming to quantify the oxidation damage under surface oxidation conditions at high temperature. Grain microstructures were considered explicitly in the finite element model where the grain boundary was taken as the primary path for oxygen diffusion. The model has been used to simulate natural diffusion of oxygen at temperatures between 650∘C and 800∘C, which are controlled by the parabolic oxidation rate and oxygen diffusivity. To study the effects of mechanical stress on oxygen diffusion, a sequentially coupled deformation-diffusion analysis was carried out for a generic specimen geometry under creep loading condition using a submodeling technique. The material constitutive behavior was described by a crystal plasticity model at the grain level and a unified viscoplasticity model at the global level, respectively. The stress-assisted oxygen diffusion was driven by the gradient of hydrostatic stress in terms of pressure factor. Heterogeneous deformation presented at the grain level imposes a great influence on oxygen diffusion at 750∘C and above, leading to further penetration of oxygen into the bulk material. Increased load level and temperature enhance oxygen concentration and penetration within the material. At 700∘C and below, mechanical loading seems to have negligible influence on the oxygen penetration because of the extremely low values of oxygen diffusivity and pressure factor. In the case of an existing surface microcrack, oxygen tends to accumulate around the crack tip due to the high stress level presented near the crack tip, leading to localized material embrittlement and promotion of rapid crack propagation.

Stresses from Oxide Film Imperfections During Metal Dusting

Oxidation Stress Evolution and Relaxation of Oxide Film/Metal Substrate System

Modification of the Mechanism for Stress-Aided Grain Boundary Oxidation Ahead of Cracks

Simulation of Metal/Oxide Interface Mobility: Effects of Mechanical Stresses on Geometrical Singularities

Oxide scale microstructure and failure mechanism of alloy 601 under varying metal dusting conditions

Effects of Roughness on Stresses in an Oxide Scale Formed on a Superalloy Substrate

Interplay between fracture and diffusion behaviors: Modeling and phase field computation

Modeling Corrosion Product Film Formation and Hydrogen Diffusion at the Crack Tip of Austenitic Stainless Steel

Diffusion and Stress Coupling Effect During Oxidation at High Temperature

Oxidation at High Temperature under Three-Point Bending Considering Stress-Diffusion Coupling Effects

A theoretical model and phase field simulation on the evolution of interface roughness in the oxidation process

A Diffusion-Coupled Cohesive Element Model for Cracking Analysis of Thermal Barrier Coatings

Theoretical Study of Coupling Mechanisms between Oxygen Diffusion, Chemical Reaction, Mechanical Stresses in a Solid-Gas Reactive System

Surface Evolution At Nanoscale During Oxidation: A Competing Mechanism Between Local Curvature Effect And Stress Effect

Effect of the thermally grown oxide and interfacial roughness on stress distribution in environmental barrier coatings

Effect of Temperature and Thermal Stress on Micropores and Cracks in Aluminum Alloy Film During Micro-Arc Oxidation

Modeling of Oxygen Diffusion Along Grain Boundaries in a Nickel-Based Superalloy

Effect of Interface Curvature on Local Growth Behavior and Stress of Thermal Barrier Coatings

Experimental study and finite element analysis of degradation behavior of epoxy zinc-rich coating system under stress corrosion

Analytical model for ionic current dominated corrosion of nanoelectrodes in metalized films: Frequency and electric stress

A finite element simulation on fully coupled diffusion, stress and chemical reaction