Abstract:Solid oxide fuel cell (SOFC), which is a generation device that converts chemical energy into electrical energy, has been regarded as a new generation device. The diffusion mechanism of metal cations and anions during the high‐temperature oxidation process of SOFC is proposed. Based on the equilibrium expression and diffusion equation, the chemo‐mechanical coupling relationship between oxide stress and thickness growth of the oxide layer is established by considering the influences of viscoplastic effect and oxide growth effect. The present theoretical result is consistent with the previous experimental results. In addition, the stress critical points corresponding to different parameters are different in initial oxidation stage. The oxide stress varies dramatically with time in the compressive stress phase, but it changes slowly in the tensile stress phase. The compressive stress that exists in the oxide layer increases with the growth coefficient (DNiO = 1000‐15 000 m−1) of the oxide layer. The oxide stresses in oxide layer and electrolyte reduce with viscoplastic coefficient of the oxide layer from JNiO = 8.97 × 10−5 Pa−1 s−1 to JNiO = 16.97 × 10−5 Pa−1 s−1 and anode‐oxide layer thicknesses from H = 30 μm to H = 660 μm, while they increase with viscoplastic coefficient of the anode from JNi = 3.81 × 10−5 Pa−1 s−1 to JNi = 12.81 × 10−5 Pa−1 s−1 and kinetic parabolic constant from kp = 2.9 × 10−15 m2s−1 to kp = 12.9 × 10−15 m2s−1 in whole oxidation stage. The oxide thickness increases with kinetic parabolic constant in the whole oxidation stage and this changing trend accords with parabolic diffusion law. The oxide thickness increases with temperatures increasing. The results obtained from this study will provide the reference to the researches of the chemo‐mechanical coupling model and performance optimization of SOFC under high‐temperature oxidation.

Diffusion and Stress Coupling Effect During Oxidation at High Temperature

Oxidation at High Temperature under Three-Point Bending Considering Stress-Diffusion Coupling Effects

Chemo-mechanical Coupling Effect on Bidirectional Diffusion Process During Oxidation

Reaction–Diffusion–Stress Coupling Effect in Inelastic Oxide Scale During Oxidation

Modeling of Growth Stress Gradient Effect on the Oxidation Rate at High Temperature

A finite element simulation on fully coupled diffusion, stress and chemical reaction

Oxidation Stress Evolution and Relaxation of Oxide Film/Metal Substrate System

Chemo-mechanical Coupling Effect on High Temperature Oxidation: A Review

Investigation of the Effect of Stress on Oxygen Diffusion in Pure Titanium Using a Phase-Field Model

Modification of the Mechanism for Stress-Aided Grain Boundary Oxidation Ahead of Cracks

Simulation of Metal/Oxide Interface Mobility: Effects of Mechanical Stresses on Geometrical Singularities

Theoretical Study of Coupling Mechanisms between Oxygen Diffusion, Chemical Reaction, Mechanical Stresses in a Solid-Gas Reactive System

A Curvature-Dependent Chemo-Mechanical Coupling Model for Two-Dimensional Oxidation on the Curved Surface

Chemo‐mechanical coupling model of solid oxide fuel cell under high‐temperature oxidation

Two-dimensional modeling of the self-limiting oxidation in silicon and tungsten nanowires

New approach to evaluate the influence of compressive stress on the oxidation of non-oxide ceramics

Modeling and simulation of mechanical-thermal-diffusional-reactional interactions in ceramic oxidation process

The Influence of Environmental Temperature on the Passive Oxidation Process in the C/SiC Composite

Surface Evolution At Nanoscale During Oxidation: A Competing Mechanism Between Local Curvature Effect And Stress Effect

Residual Stress Analysis in the Oxide Scale/metal Substrate System Due to Oxidation Growth Strain and Creep Deformation

Mechanical–chemical coupling phase-field modeling for inhomogeneous oxidation of zirconium induced by stress–oxidation interaction