Abstract:In this paper, a coupled mechanical-chemical model is established based on the thermodynamic framework, in which the contribution of chemical expansion to free energy is introduced. The stress-dependent chemical potential equilibrium at the gas-solid interface and the stress gradient-dependent diffusion equation as well as a so-called generalized force which is conjugate to the oxidation rate are derived from the proposed model, which could reflect the influence of stresses on the oxidation reaction. Based on the proposed coupled mechanical-chemical model, a user element subroutine is developed in ABAQUS. The numerical simulation of the high temperature oxidation in the thermal barrier coating is carried out to verify the accuracy of the proposed model, and then the influence of stresses on the oxidation reaction is investigated. In thermally grown oxide, the considerable stresses would be induced by permanent volumetric swelling during the oxidation. The stresses play an important role in the chemical potential equilibrium at the gas-solid interface and strongly affect the oxidation reaction. The gradient of the stresses, however, only occurs in the extremely thin oxidation front layer, which plays a very limited role in the oxidation reaction. The generalized force could be divided into the stress-dependent and the stress-independent parts. Comparing with the stress-independent part, the stress-dependent part is smaller, which has little influence on oxidation reaction. Published by AIP Publishing.

A theoretical model and phase field simulation on the evolution of interface roughness in the oxidation process

Analysis on High-Temperature Oxidation and Growth Stress of Iron-Based Alloy Using Phase Field Method

Mechanical–chemical coupling phase-field modeling for inhomogeneous oxidation of zirconium induced by stress–oxidation interaction

Modeling of Oxidation Kinetics of Y-Doped Fe–Cr–Al Alloys

Phase Field Simulation For High-Temperature Oxidation Behavior Of Thermal Barrier Coatings Under Shot Peening

Chemomechanical Finite Element Analysis for Surface Oxidation of Aluminum Alloy

PHASE-FIELD MODELING OF MOLTEN ZIRCONIUM OXIDATION COUPLED WITH FLOW AND HEAT TRANSPORT

Simulation for microstructure evolution of Al-Si alloys in solidification process

A Phase-Field Study on Internal to External Oxidation Transition in High-Temperature Structural Alloys

Interplay between fracture and diffusion behaviors: Modeling and phase field computation

Multi-component Phase-Field Simulation of Microstructural Evolution and Elemental Distribution in Fe–Cu–Mn–Ni–Al Alloy

A Curvature-Dependent Chemo-Mechanical Coupling Model for Two-Dimensional Oxidation on the Curved Surface

Modeling of Growth Stress Gradient Effect on the Oxidation Rate at High Temperature

Chemo-mechanical Coupling Effect on Bidirectional Diffusion Process During Oxidation

A Coupled Mechanical-Chemical Model For Reflecting The Influence Of Stress On Oxidation Reactions In Thermal Barrier Coating

Finite Element Analysis of the Effects of Thermally Grown Oxide Thickness and Interface Asperity on the Cracking Behavior Between the Thermally Grown Oxide and the Bond Coat

Oxidation Mechanism of ZrB2/SiC Ceramics Based on Phase-Field Model

Phase Field Model for Non-equilibrium Interface Conditions

Electronic-scale assessment of high-temperature oxidation mechanisms in a novel Fe-based alloy

A Chemomechanical Model for Stress Evolution and Distribution in the Viscoplastic Oxide Scale During Oxidation