Abstract:This letter reviews some fundamental trade-offs in RF amplifier design as well as optimization from devices to circuit design using nano-scale CMOS process, that reduces the impact of manufacturing variations on integrated wideband low noise amplifiers (LNA). The design considerations include the unity-gain frequency, high frequency noise, power consumption and linearity of active devices in addition to accurate physic models for passive components such as RF and transmission lines. All these considerations are traded off among a system designs aspect. For an example in a commercial 65 nm CMOS technology design, by optimizing the unity width of the transistors and the transmission lines, a three-stage LNA achieves a peak gain of 22.3 dB at 60 GHz with a Noise Figure of 5.17 dB. Each stage consumes 5.2 mA from a supply voltage of 1.5 V. By using Monte Carlo simulation, the LNA with optimized transistor and interconnects has a higher gain and lower Noise Figure. The circuit is able to work robustly against process variations by optimizing the transistors and the transmission lines.

RF LDMOS Design Based on Modified CMOS Process

Optimization of RF Performance and Reliability of 28V RF-LDMOS

Design and Optimization of a Milli-Meter Wave Amplifier Using Nano-Scale CMOS Devices

Three-solenoid Windings Transformer Baluns on CMOS-grade Silicon Substrate

Design of High Reliability RF-LDMOS by Suppressing the Parasitic Bipolar Effect Using Enhanced P-Well and Double Epitaxy

Study on Electro-Thermo-Mechanical Responses of Bonding Wires Arrays Used for the Package Design of Ldmosfet-Based Rf Amplifier

Physical design optimization of MOSFETs for millimeter wave and sub-millimeter wave circuits

Design of A Novel W-Sinker Rf Ldmos

A Novel RF LDMOS Fabricated with Standard Foundry Technology

Rf Ldmos with Excellent Robustness for Wideband Application

A Novel LDMOSFET on Patterned-SOI for RF Wireless Applications

Design and Fabrication of LDMOS Power Device on SOI Substrate

RF CMOS technology for MMIC

Ultra Low Loss and High Linearity RF Switch Using 130nm SOI CMOS Process

Modeling and Optimization of Substrate Electromagnetic Coupling and Isolation in Modern Lightly Doped CMOS Substrate

Design of a Dual-Material Gate LDMOS

RF LDMOS power transistor for multi-carrier GSM base station

Internal Matching Circuit Design of Rf Ldmos Power Transistor

Patterned silicon-on-insulator technology for RF Power LDMOSFET

High Performance SOI Gate-Bulk Connected LCMOSFET for RF Power Amplifier Application in Short and Medium Range Wireless Communication Systems

A 22nm FDSOI Technology Optimized for RF/mmWave Applications