Abstract:Impact is the most important factor affecting the reliability of Micro-Electro-Mechanical System (MEMS) gyroscopes, therefore corresponding reliability design is very essential. This paper proposes a shock-protected structure (SPS) capable of withstanding a full temperature range from ‚ąí40 ¬įC to 80 ¬įC to enhance the shock resistance of MEMS gyroscopes. Firstly, the shock transfer functions of the gyroscope and the SPS are derived using Single Degree-of-Freedom and Two Degree-of-Freedom models. The U-folded beam stiffness and maximum positive stress are deduced to evaluate the shock resistance of the silicon beam. Subsequently, the frequency responses of acceleration of the gyroscope and the SPS are simulated and analyzed in Matlab utilizing the theoretical models. Simulation results demonstrate that when the first-order natural frequency of the SPS is approximately one-fourth of the gyroscope's resonant frequency, the impact protection effect is best, and the SPS does not affect the original performance of the gyroscope. The acceleration peak of the MEMS gyroscope is reduced by approximately 23.5 dB when equipped with the SPS in comparison to its counterpart without the SPS. The anti-shock capability of the gyroscope with the SPS is enhanced by approximately 13 times over the full-temperature range. After the shock tests under the worst case, the gyroscope without the SPS experiences a beam fracture failure, while the performance of the gyroscope with the SPS remains normal, validating the effectiveness of the SPS in improving the shock reliability of MEMS gyroscopes.

Shock resistance of MEMS capacitive accelerometers

Experimental analysis of MEMS capacitive accelerometer's shock resistibility

2 MEMS ACCELEROMETERS AND SHOCK EXPERIMENTS 2 . 1 MEMS Accelerometers

Flexible Stop and Double-Cascaded Stop to Improve Shock Reliability of Mems Accelerometer

Design and experiment of high-overload capacitive micro-machined accelerometers

Study of a Novel Micromachined Capacitive Accelerometer

Noise Behaviors of a Closed-Loop Micro-Electromechanical System Capacitive Accelerometer

Thermal Stress Analysis of MEMS Accelerometer Based on Finite Element Method

Design, Fabrication and Test of a Low Range Capacitive Accelerometer With Anti-Overload Characteristics

Micro Accelerometer Reliability in Shock Environment

Micromachined integrated self-adaptive nonlinear stops for mechanical shock protection of MEMS

Design and Simulation of Micro-Platform for MEMS Devices Applied in Shock Environment.

A Transfer Function Approach to Shock Duration Compensation for Laboratory Evaluation of Ultra-High-G Vacuum-Packaged MEMS Accelerometers

Design of a Shock-Protected Structure for MEMS Gyroscopes over a Full Temperature Range

Modeling and Simulation of A Silicon Integration Tri-Axial Piezoresistive MEMS Accelerometer Chip Used for High Impact Test

Mechanical Latching Stops for Reliability Improvement of MEMS in Shock Environments

Enhancing the Shock Response Performance of Micromachined Silicon Resonant Accelerometers by Electrostatic Active Damping Control

Modeling and Analysis of a SiC Microstructure-Based Capacitive Micro-Accelerometer

Investigation and experiment of high shock packaging technology for High-G MEMS accelerometer

Structural Design of MEMS Acceleration Sensor Based on PZT Plate Capacitance Detection

Design and Fabrication Research on a Capacitive Accelerometer