Abstract:The ability of wood–plastic composites (WPCs) to withstand various loads and resist plastic failure is attracting more and more interest due to the global increase in demand for WPCs by over 6 million tons per year. Among the most important and innovative research methods are those based on fracture mechanics—their results enable material designers to optimize the structures of these hybrid polymer composites at the nano, micro and macro levels, and they allow engineers to more accurately evaluate and select functional, sustainable, long-lasting and safe product designs. In this study, standard single-edge notched bending (SENB) tests were used to analyze the fracture toughness of two different extruded WPCs along the longitudinal (L) and transverse (T) directions of extrusion. In addition to their resistance to crack propagation, critical fracture criteria, initial contact stiffness, fracture parameters and fracture surfaces, the mechanical properties of these composites were also investigated. The results showed that WPC-A coded composites withstood higher loads until failure in both directions compared to WPC-B. Despite the larger data spread, both types of composites were more resistant to crack propagation in the T direction. Mode II of crack propagation was clearly visible, while mode III was not as pronounced. The experimental results and the numerical finite element (FE) model developed up to 58% of the maximum load correlated well, and the obtained deformation curves were best approximated using cubic equations (R2 > 0.99). The shear stress zone and its location, as well as the distribution of the equivalent stresses, had a major influence on crack propagation in the fracture process zone (FZP).

Impact Strength and Fractal Characteristic of PLA-Based Wood Plastic Composites

Correlation Between Fractal Dimension and Impact Strength for Wood Plastic Composites

Polylactide-Based Wood Plastic Composites Modified with Linear Low Density Polyethylene

Wood Flour/polylactide Biocomposites Toughened with Polyhydroxyalkanoates

Experimental and Numerical Investigation of the Fracture Behavior of Extruded Wood–Plastic Composites under Bending

Polylactide-Based Wood Plastic Composites Toughened with SBS

Study on Preparation and Properties of PLA/Wood Flour Composites

Toughening and Crystallization Behavior of Poly(Lactic Acid)/Wood Flour Composite

Correlation Between Impact Strength and Fractal Dimensions of Fracture Surface for PLLA/nano-CaCO3 Composites

Effect of wood flour and compatibilizer content on the properties of wood-plastic composites

Tensile Strength Of Wood Polylactic Acid Composite: A Meta-Analysis

Low-velocity impact behavior and residual tensile strength of CFRP laminates

Impact Response of Bamboo-Plastic Composites with the Properties of Bamboo and Polyvinylchloride (PVC)

Fractal characterization of impact fracture surface of polypropylene nanocomposites

Study on Two-dimensional Fractal Characteristics of Fractography of Polypropylene/Diatomite Composites

Effect of Chemical Modification on Mechanical Properties of Wood-Plastic Composite Injection-Molded Parts

Mechanical and Thermal Performance of Coextruded Wood Plastic Composites for Structural Applications

Relationship Between Fractal Dimensions of Fracture Surface and Impact Toughness of Polycaprolactone/nano‐caco3 Composites

Investigation on the Properties of Multiple-plastic Based Wood Plastic Composites

Preparation Of Plasticized Poly (Lactic Acid) And Its Influence On The Properties Of Composite Materials

STRUCTURAL ASSESSMENT OF LAMINATED WOOD VENEER/PLASTIC SHEET COMPOSITES USED AS BUILDING MATERIAL