Abstract:The aim of this study was to investigate the physical, mechanical, morphological, structural, and thermal properties of polylactic acid (PLA) and polyhydroxybutyrate (PHB) biopolymer composites reinforced with thermally treated wood flour and to determine the formulations having optimum properties by using multi-criteria decision-making (MCDM) methods. As a filler, Scots pine wood flour (untreated and thermally treated at 212 °C) was used at the loading rates of 10% and 30%. The samples were prepared using a twin-screw extruder and then by compression molding. The results showed that the addition of both thermally treated and untreated wood flour slightly increased the density of the composites. According to the color measurement, the thermally treated wood composites were slightly darkened in appearance. In the composites, with both wood fillers, the water absorption and thickness swelling ratios had increased during the 20–250 days of water exposure. Lower water absorption and thickness swelling rates were found for the composites with thermally treated wood filler compared to the other composites. The wood fillers generally lowered the mechanical properties of the PLA and PLA/PHB composites, with the PHB composites as the exception. However, the tensile modulus and Izod impact strength of the composites generally increased with the addition of wood fillers. Morphological examination performed by scanning electron microscopy (SEM) indicated that the wood flour was mostly homogeneously distributed in the matrix, which improved the mechanical properties of the composites. Thermogravimetric analysis (TGA) showed that the addition of wood filler to the neat biopolymers as a rule did not provide significant improvement in the thermal stability; however, the fillers increased the thermal stability of neat PHB. The Fourier-transform infrared (FTIR) spectroscopy detected no differences in the chemical structure of the composites. The X-ray diffraction (XRD) results indicated a general increase in the crystallinity with the addition of wood fillers to the neat biopolymers and the blends. All the findings were subjected to MCDM analysis to determine the formulation having the optimum properties and the results showed this to be the neat PLA sample.

Study on Preparation and Properties of PLA/Wood Flour Composites

Improved properties of PLA biocomposites toughened with bamboo cellulose nanowhiskers through silane modification

Effects of Bamboo Cellulose Nanowhisker Content on the Morphology, Crystallization, Mechanical, and Thermal Properties of PLA Matrix Biocomposites

Poly(Lactic Acid) Biocomposites Reinforced With Ultrafine Bamboo-Char: Morphology, Mechanical, Thermal, And Water Absorption Properties

Wood Flour-Reinforced Green Composites: Parameter Optimization via Multi-criteria Decision-Making Methods

Study on Properties of Modified Bamboo Fiber Reinforced Polypropylene Composites

Prescription for workplace safety: bend and lift correctly to avoid back injuries!

Effect of wood flour and compatibilizer content on the properties of wood-plastic composites

Research on the preparation and properties of foamed PP/wood flour composites

Preparation and characterization of bio-based green renewable composites from poly(lactic acid) reinforced with corn stover

Naval influences upon the surgery of peptic ulceration.

Synergistic reinforcement of polylactic acid/wood fiber composites by cellulase and reactive extrusion

Thermal, Mechanical and Morphological Behavior of Poly(propylene)/Wood Flour Composites

Preparation and mechanism of lightweight wood fiber/poly(lactic acid) composites

Preparation and properties of PLA/PBAT composites modified with different filler particles

FDM 3D Printing and Properties of WF/PBAT/PLA Composites

Poly(l-lactide)/poly(d-lactide)/bamboo fiber (BF) bio-composites with enhanced heat resistance, mechanical and rheological performance

Mechanical Performances Analysis and Prediction of Short Plant Fiber-Reinforced PLA Composites

Comparison of Properties of Poly(Lactic Acid) Composites Prepared from Different Components of Corn Straw Fiber

Influence of bio-coupling agent on interfacial interlocking compatibility and toughness of ultrafine bamboo charcoal/polylactic acid composite film

Study on Properties of Wood Fiber Reinforced Polypropylene Composites