Abstract:The current work presents the reformulation of a composite based on high-density polyethylene obtained through the recycling of blow-molded containers (rHDPE) with natural fiber residues (wood sawdust). This material is technically and industrially known as WPC (wood plastic composite). The original formulation of this material contains 34% high-density polyethylene and 60% sawdust by weight fraction, while the remaining components include additives and coupling agents such as wax (Coupling Agent TPW 813 for plastic woods), stearic acid, and color pigment. The composite material was processed using the profile extrusion method, from which samples were obtained to conduct various experimental tests. The mechanical analysis revealed that both the strength and Young's modulus of the tensile and flexural properties slightly increased with the addition of sawdust to the composite. Additionally, the stiffness was higher compared to high-density polyethylene, indicating a direct relationship between these properties and the amount of sawdust incorporated. Besides this, other characterization methods were performed on the material, including density, hardness, and compression tests, as well as differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), natural and accelerated aging tests, Vicat softening temperature, and heat deflection temperature analysis (HDT). The initial evaluation provides a guide to enhance the most important properties with the aim of using the extruded profiles as pergolas in the real estate sector. Therefore, new formulations are developed with the assistance of Minitab 21 software, maintaining a constant proportion of materials that do not affect the mechanical properties, such as wax, stearic acid, and color pigment. Once the formulations are made, each one is characterized through tensile tests to determine which has the best performance. The formulation with the highest strength is re-characterized using the techniques mentioned in the starting material to obtain a material with the most optimal characteristics.

Polylactide-Based Wood Plastic Composites Toughened with SBS

Improved properties of PLA biocomposites toughened with bamboo cellulose nanowhiskers through silane modification

Polylactide-Based Wood Plastic Composites Modified with Linear Low Density Polyethylene

Wood Flour/polylactide Biocomposites Toughened with Polyhydroxyalkanoates

Effect of wood flour and compatibilizer content on the properties of wood-plastic composites

Tensile Strength Of Wood Polylactic Acid Composite: A Meta-Analysis

Strong and Durable Wood Designed by Cell Wall Bulking Combined with Cell Lumen Filling

Impact Strength and Fractal Characteristic of PLA-Based Wood Plastic Composites

Wood‐thermoplastic Composites from Wood Flour and High‐density Polyethylene

Renewable and Supertoughened Polylactide-Based Composites: Morphology, Interfacial Compatibilization, and Toughening Mechanism

Toughening and Crystallization Behavior of Poly(Lactic Acid)/Wood Flour Composite

Wood Plastic Composite Based on Recycled High-Density Polyethylene and Wood Waste (Sawdust)

Preparation of Long Sisal Fiber-Reinforced Polylactic Acid Biocomposites with Highly Improved Mechanical Performance

Toughening and Heat-Resistant Modification of Degradable PLA/PBS-Based Composites by Using Glass Fiber/Silicon Dioxide Hybrid Fillers

Properties of wood-plastic composites based on pvc/pla/pbat ternary blend

Effect of oligomers from epoxidized soybean oil and sebacic acid on the toughness of polylactic acid /bamboo fiber composites

Construction of highly ductile, UV-shielding polylactide/poly(butylene adipate- co -terephthalate) biocomposites with hyperbranched polysiloxane functionalized lignin as a biocompatibilizer

Durability of High-Density Polyethylene (HDPE)- and Polypropylene (PP)-Based Wood-Plastic Composites—Part 1: Mechanical Properties of the Composite Materials

Preparation and Performance of Poly(lactic Acid)-Wood Flour-Glycidyl Methacrylate-g-Ethylene-Octene Copolymer Composites

Influence of carboxy-terminated hyperbranched polyester and polyethylene glycol on the mechanical and thermal properties of polylactic acid/straw flour composites

Interface Research of Wood/Plastic Composites Modified by Long Chain Segment Block Graft