Abstract:Driven by the motive of minimizing the transportation costs of raw materials to manufacture wood–plastic composites (WPCs), Part I and the current Part II of this paper series explore the utilization of an alternative wood feedstock, i.e., pellets. Part I of this study reported on the characteristics of wood flour and wood pellets manufactured from secondary processing mill residues. Part II reports on the physical and mechanical properties of polypropylene (PP)-based WPCs made using the two different wood feedstocks, i.e., wood flour and wood pellets. WPCs were made from 40-mesh wood flour and wood pellets from four different wood species (white cedar, white pine, spruce-fir and red maple) in the presence and absence of the coupling agent maleic anhydride polypropylene (MAPP). With MAPP, the weight percentage of wood filler was 20%, PP 78%, MAPP 2% and without MAPP, formulation by weight percentage of wood filler was 20% and PP 80%. Fluorescent images showed wood particles’ distribution in the PP polymer matrix was similar for both wood flour and ground wood pellets. Dispersion of particles was higher with ground wood pellets in the PP matrix. On average, the density of composite products from wood pellets was higher, tensile strength, tensile modulus and impact strength were lower than the composites made from wood flour. Flexural properties of the control composites made with pellets were higher and with MAPP were lower than the composites made from wood flour. However, the overall mechanical property differences were low (0.5–10%) depending on the particular WPC formulations. Statistical analysis also showed there was no significant differences in the material property values of the composites made from wood flour and wood pellets. In some situations, WPC properties were better using wood pellets rather than using wood flour. We expect if the material properties of WPCs from wood flour versus wood pellets are similar and with a greater reduction in transportation costs for wood pellet feedstocks, this would be beneficial to WPC manufacturers and consumers.

Investigation on the Properties of Multiple-plastic Based Wood Plastic Composites

Effect of wood flour and compatibilizer content on the properties of wood-plastic composites

Sustainable Utilization of Waste Printed Circuit Boards Powders in Hdpe-Wood Composites: Synergistic Effects of Multicomponents on Structure and Properties

Preparation and Characterisation of Sustainable Wood Plastic Composites Extracted from Municipal Solid Waste

Closed-loop Recyclable Wood-Plastic Composite As a Sustainable Alternative to Wood: A Solution for Utilizing Wood Waste and Promoting Carbon Sequestration

Characteristics of paper mill sludge-wood fiber-high-density polyethylene composites

Composite materials production using waste plastic taken from municipal solid waste and its landfill

Methods to modify mechanical properties of polypropylene compo sites reinforced by wood flour

Polylactide-Based Wood Plastic Composites Modified with Linear Low Density Polyethylene

Study on Extrusion of Poly(vinyl chloride)/Wood Flour Composite

Recycling of waste FRP and corn straw in wood plastic composite

Effects of Natural Fiber Waste, Content, and Coupling Agent on the Physical and Mechanical Properties of Wood Species–Plastic Composites as Green Materials

Upgrading Mixed Plastic Wastes to Prepare Wood Plastic Composites Via Solid Mechanochemical Method

Preparation and Mechanical Properties of the Environmentally Friendly Wood-Plastic Composites

Fabrication of flame‐retardant wood plastic composites based on wasted bean dregs with recycled <scp>PE</scp> via mechanochemical crosslinking

Superior Dispersion Led Excellent Performance of Wood-Plastic Composites Via Solid-State Shear Milling Process

Research on Extrusion Processing and Property of Wood-plastics Composite

Properties of Wood–Plastic Composites Manufactured from Two Different Wood Feedstocks: Wood Flour and Wood Pellets

Development of Wood Polymer Composites from Recycled Wood and Plastic Waste: Thermal and Mechanical Properties

Wood‐thermoplastic Composites from Wood Flour and High‐density Polyethylene

Effect of Chemical Modification on Mechanical Properties of Wood-Plastic Composite Injection-Molded Parts