Abstract:Nano-scaled reactive multilayer films are the attractive option for the synthesis of intermetallic compounds and for local joining applications. Reactive multilayers consist of alternating layers of reactants having a large negative enthalpy of mixing. For certain designs, these foils exhibit rapid exothermic reactions at high temperature. A reaction is ignited by an external energy source such as an electric spark or a mechanical load. Once ignited, reactions within foils can produce sufficient heat at a rapid rate to induce further layer intermixing via thermally induced atomic diffusion. This results in a self-propagating reaction that then envelopes the foil. Recent work igniting energetic powder mixtures has employed lasers as a means for determining the ignition temperatures and energies. Lasers provide a controllable source of energy that can be used to better quantify ignition parameters still unknown for many reactive material systems. Short-pulsed lasers, in particular, allow for controlled energy deposition into a small volume. Despite a few studies of ignition, the susceptibility of exothermic nano-scaled multilayer to external pulsed laser has not been significantly explored. In this work, self-supporting Ti/Al (modulation ratio 1) multilayer films with different modulation structures were prepared by means of magnetron sputtering method and a sacrificial layer process. These films were ignited by a single pulse irradiation for their self-propagating reactions. The ignition fluence thresholds were determined and their microstructures were observed using SEM and TEM. Propagation rate was characterized by high speed photography. DSC and XRD were used to analyze the reaction processes and products. It indicated that all measured critical ignition fluences (6 similar to 17 J/cm(2)) are above the typical ablation threshold fluences for metals under laser irradiation. With decreasing modulation period, the ignition fluence threshold decreases and the propagation velocity increases. In contrast, when the premixed thickness was a substantial fraction of modulation period for smaller modulation period, decreasing modulation period increased the ignition threshold fluences and reduced the propagation rate. For a given thickness of multilayers, the modulation structure with larger modulation period and smaller period numbers released more heat. Typically, the self-propagating reaction ignited by pulsed laser yielded one kind of product TiAl intermetallics.

Fabrication and Performance Characterization of Al/Ni Multilayer Energetic Films

Fabrication and Characterization of Al/NiO Energetic Nanomultilayers

Fabrication and characterization of NiO films for energetic nano-multilayers by direct current reactive sputtering

Study on Electro Explosion Performance of Al/Ni Bridge Films

TiN/AlN Nano Multilayers Film Fabricated by Plasma Enhanced Atomic Layer Deposition

Fabrication and Characteristics of Al/PTFE Multilayers and Application in Micro-initiator

FABRICATION AND CHARACTERIZATION OF FUNCTIONALLY GRADED Ni–Ti MULTILAYER THIN FILMS

Characteristics of the Energetic Micro-initiator Through Integrating Al/Ni Nano-multilayers with Cu Film Bridge

Mechanical Properties and Thermal Stability of TiAlN/Ta Multilayer Film Deposited by Ion Beam Assisted Deposition

Fabrication and Characterization of Cold Rolled Ni/Al Multilayer Foils

Microstructural and electrical behavior of NiCr/Al nanomultilayered films prepared by magnetron sputtering

Chemical reactions of Ni/Al multilayers upon ultrahigh compressive load at ambient temperature

Enhanced Energetic Performances Based on Integration with the Al/PTFE Nanolaminates

Preparation and Mechanical Properties of TiN/AlN Nano Multilayers

Microstructure and Mechanical Properties of Sputter Deposited Ni/Ni3Al Multilayer Films at Elevated Temperature

Laser-Ignited Self-Propagating Behavior of Self-Supporting Nano-Scaled Ti/Al Multilayer Films

Effect of Preparation Method on Film Structure and Thermal Stability of Me/MeN/Me (me = Al, Ti) Multilayer Thin Films

Fractography, Elastic Modulus, and Oxidation Resistance of Novel Metal-Intermetallic Ni/Ni3al Multilayer Films

A Thick Tin/Ticn Multilayer Film by Dc Magnetron Sputtering

Influence of Interface Layer on the Properties of Exploding Foil Flyer Generator by Integrating Al/Ni Multilayers

Strengthening Mechanisms in NiTi(NbFe)/amorphous-CuZrAl Multilayered Thin Films