Abstract:Illustrative representation of the magnetron sputtering system. The multifractal analysis for NiO thin films with different thicknesses. UV–visible transmittance spectra for the four studied samples. Utilizing radio frequency magnetron sputtering, we successfully fabricated nickel oxide thin films with different thickness (from 80 to 270 nm), and conducted an in‐depth examination of their structural, morphological, optical, and electrical properties. The crystal structure and surface roughness were determined using x‐ray diffraction (XRD) and atomic force microscopy (AFM), respectively. The XRD analyses showed that the films were composed of cubic nickel oxide, exhibiting a notable orientation along the (200) direction. This crystal texture partially increased when the film thickness reached 270 nm. In addition, a direct correlation between film thickness and crystallite size was observed, with the latter increasing as the former did. AFM analysis provided insights into the surface morphology, revealing metrics like the bearing area, 3D surfaces intersections, and statistical properties of surface height. These insights underscore the relationship between film thickness and surface properties, which in turn influence the overall electrical, and prominently, optical properties of the films. Employing transmittance UV–visible spectroscopy, we characterized the optical behavior of these films, noting a proportional increase in refractive index with film thickness. Additionally, resistivity was observed to increase concomitantly with film thickness. In conclusion, the deposition process's film thickness acts as a pivotal parameter for fine‐tuning the structural, morphological, and optical properties of nickel oxide thin films. This knowledge paves the way for optimizing nickel oxide‐based devices across various applications. Research Highlights We synthesized and characterized of p‐type semiconducting NiO thin films sputtered on substrates by using RF magnetron sputtering with different thickness. Advanced crystalline structures and fractal features extracted from XRD and AFM analysis. The 2D and 3D surface analysis of the samples indicates a complex structure with an imperfect self‐similarity that suggests a multifractal structure. We represented graphically the relative representation of higher geometric objects in the AFM image. We attributed the optical and electrical properties of the samples to the crystallite size, and the concurrent reduction in oxygen vacancies and crystalline defects within the films.

Fabrication and characterization of NiO films for energetic nano-multilayers by direct current reactive sputtering

Fabrication and Characterization of Y2O3 Stabilized ZrO2 Films Deposited with Aerosol-Assisted MOCVD

Microstructure and Optical Properties of ZnO Films Deposited by Radio-frequency Reactive Magnetron Sputtering

Fabrication and Performance Characterization of Al/Ni Multilayer Energetic Films

Characterizations of Nickel Oxide Thin Films Prepared by Reactive Radio Frequency Magnetron Sputtering

Structural and optical characterization of NiO polycrystalline thin films fabricated by spray-pyrolysis

NiO thin films fabricated using spray-pyrolysis technique: structural and optical characterization and ultrafast charge dynamics studies

Preparation and Properties of NiO Films Via Sol-gel Process and Spin-coating

Investigation on tailoring physical properties of Nickel Oxide thin films grown by dc magnetron sputtering

Properties of the Highly Textured (200) NiO Thin Film Deposited by RF Magnetron Sputtering

Effect of sputtering pressure and oxygen content on the electrochromic properties of NiO films by DC magnetron sputtering

Linearization and characterization of the Wemple – DiDomenico model of ZnO/Ni/ZnO tri-layer thin films prepared by ALD and DC magnetron sputtering

Influence of film thickness on structural, optical, and electrical properties of sputtered nickel oxide thin films

Physical characteristics and cation distribution of NiFe2O4 thin films with high resistivity prepared by reactive co-sputtering

The influence of substrate temperature on the structure and optical properties of NiO thin films deposited using the magnetron sputtering in the layer-by-layer growth regime

Effects of atomic oxygen on the growth of NiO films by reactive magnetron sputtering deposition

Sputtering Power Induced Physical Property Variation of Nickel Oxide Films by Radio Frequency Magnetron Sputtering

Preparation and Characterization of Highly Oriented NiO(200) Films by a Pulse Ultrasonic Spray Pyrolysis Method

Interface and crystallization evolution induced by reactive nitrogen and oxygen sputtering in Ni/Ti multilayer

Growth, Physical and Electrical Characterization of Nickel Oxide Thin Films Prepared by Plasma-Enhanced Atomic Layer Deposition Using Nickelocene and Oxygen Precursors

Deposition and Microstructural Characterization of NiO Thin Films by a Spray Pyrolysis Method