Abstract:The Ni-Al intermetallic sheets were prepared by the reaction synthesis of pure Ni and Al foils with different thickness ratios. The first stage was performed at 640 °C/20 MPa/6 h to consume Al layers, and the second stage was performed at 1200 °C/20 MPa/1 h to complete the synthesis of Ni-Al intermetallic sheets. The thickness ratios of original Ni and Al foils strongly affected the microstructure and mechanical properties of Ni-Al intermetallic sheets. When Ni/Al thickness ratio was 1:1.5 (R1:1.5), the microstructure was single-phase NiAl with bimodal grain structure, and it transformed into coarse grains dominated single-phase NiAl structure when Ni/Al thickness ratio was 1:1 (R1:1). The microstructures changed to NiAl+Ni3Al+Ni when the ratios were 1:0.63 (R1:0.63) and 1:0.25 (R1:0.25). At ambient temperature, Samples R1:0.25 and R1:0.63 had high strength, while Samples R1:1 and R1:1.5 showed serious brittleness. At high temperature, Sample R1:1 showed preferable ductility with the elongation of 61.3%, 71.4% and 101.3% at 800 °C, 900 °C and 1000 °C, respectively; Sample R1:0.63 showed the highest tensile strength, with the values of 350.3 MPa, 230.5 MPa and 140.2 MPa at 800 °C, 900 °C and 1000 °C, respectively. For the fracture at ambient temperature, Sample R1:0.25 showed a mixed fracture mode of dimple fracture and quasi-cleavage fracture; the fracture mode of Sample R1:0.63 was mainly cleavage fracture; Sample R1:1 showed a typical brittle cleavage fracture with a large number of river-like patterns; the fracture mode of Sample R1:1.5 was brittle transgranular fracture for coarse grain layers (CGLs) and intergranular fracture for fine grain layers (FGLs). At high temperature, Samples R1:1.5 and R1:1 were mixed fracture modes of dimple fracture and quasi-cleavage fracture; the fracture mode of Sample R1:0.63 was mixed quasi-cleavage and cleavage fracture; the fracture mode of Sample R1:0.25 was single cleavage fracture with microcracks at the NiAl layers.

Chemical reactions of Ni/Al multilayers upon ultrahigh compressive load at ambient temperature

Reaction Synthesis of Nickel/Aluminide Multilayer Composites Using Ni and Al Foils: Microstructures, Tensile Properties, and Deformation Behavior

Refining Micron-Sized Grains to Nanoscale in Ni-Co Based Superalloy by Quasistatical Compressive Deformation at High Temperature

Microstructures and properties of in situ synthesis Ni/Ni-Al multilayer composites

Reaction Synthesis of Ni/Ni3Al Multilayer Composites Using Ni and Al Foils: High-temperature Tensile Properties and Deformation Behaviour

Atomic insights into shock-induced alloying reaction of premixed Ni/Al nanolaminates

Microstructural evolution and mechanical properties of Ni/Al reactive nanolaminates with different NixAly intermetallic phases

Effect of Microstructure on Energy Release Characteristics of Al/Ni Energetic Structural Material Prepared by Cold Spraying

Atomistic simulations of shock-induced alloying reactions in Ni/Al nanolaminates

Deformation Mechanisms Dominated by Decomposition of an Interfacial Misfit Dislocation Network in Ni/Ni3Al Multilayer Structures

Fabrication and Performance Characterization of Al/Ni Multilayer Energetic Films

Effects of Ni Foil Thickness on the Microstructure and Tensile Properties of Reaction Synthesized Multilayer Composites

The microstructure and mechanical properties of reaction synthesized Ni-Al intermetallic sheets by pure Ni/Al foils with different thickness ratios

Mechanical properties and strengthening mechanism of Ni/Al nanolaminates: role of dislocation strengthening and constraint in soft layers

Architecture-independent reactivity tuning of Ni/Al multilayers by solid solution alloying

Synthesis of bulk reactive Ni–Al composites using high pressure torsion

Combustion Synthesis Reaction Behavior of Cold-Rolled Ni/Al and Ti/Al Multilayers

The synthesis and mechanical property evaluation of Ni/Ni3Al microlaminates

Impact of substrate thickness and surface roughness on Al/Ni multilayer reaction kinetics

A Molecular Dynamics Study of Ag-Ni Nanometric Multilayers: Thermal Behavior and Stability

Microstructure and formation mechanism of Ni-Al intermetallic compounds fabricated by reaction synthesis