Abstract:The effect of rolling temperature on the incomplete recrystallization behavior and the relationship to mechanical properties in 0.06C–4Mn-1.2Cr (wt.%) steel was investigated. Three plates of experimental steel were produced by hot rolling at different temperatures and intercritical annealing processes in this study. The microstructure of experimental steels was examined by optical microscopy (OM), scanning electron microscopy (SEM), X-ray diffraction (XRD), electron backscatter diffraction (EBSD), and transmission electron microscope (TEM). The mechanical properties of test steel were examined by impact test and tensile test. Austenite reversion and cementite precipitation-dissolution was numerically simulated under the assumption of local equilibrium. With the decrease of hot rolling temperature from 1000 °C to 800 °C, the uniform equiaxed prior austenite grains microstructures changed to heterogeneous microstructures of laminated and ultrafine prior austenite grains arranged alternatively. The tensile and impact tests revealed that the medium manganese steels rolling at 800 °C had an excellent combination of mechanical properties. Elongation had a great relationship with retained austenite fraction and stability. The fractography of impact specimens was examined to explore the toughening mechanism of the micro-laminated steels. The steel with uniform equiaxed grain structure exhibited a relatively low tensile strength of 750 MPa and low elongation of ∼20% and an extremely poor low-temperature toughness of ∼40 J at −40 °C. An enhanced low-temperature toughness (∼233 J at −40 °C), as well as an improved tensile strength (823 MPa) and higher elongation of ∼40%, was obtained in the steel with heterogeneous microstructures. The content of austenite in heterogeneous microstructure is twice that in uniform equiaxed grain structure. And cementite dissolved more thoroughly in the heterogeneous microstructure. The high austenite content of heterogeneous microstructures enabled the steel to be significantly stronger and ductile, which contributed to the high tensile strength and elongation to some extent. It is concluded that the effect of interface decohesion resulted in the occurrence of delamination. And the high austenite content and delamination greatly improved the low-temperature toughness of experimental steel.

Study on recrystallization behaviour of hot medium plate rolling

Study on the Prediction of Rolling Force of 16mnr Hot Rolled Plate

Study on dynamic recrystallization of ultra-high strength 22MnB5 steel during hot rolling

Effect of Recrystallization on Roll Gap Setting of Medium Plate Rolling

Static softening behavior of 316L stainless steel under flexible rolling process

Recrystallization and grain growth in hot rolling

Implementation of Experimental Static Recrystallization of High Strength Steel into Computational Simulation of Multi-pass Slab Hot Rolling

Static Recrystallization Behavior of Twin Roll Cast Low-Carbon Steel Strip

Recrystallization Behavior and Mechanical Properties of Az31b Alloy During the Hot-Rolling Process

Numerical simulation on recrystallization behavior and microstructure evolution during hot continuous rolling process of 38CrMoAl steel rod

Research on Dynamic Recrystallization of the Microalloyed Forging Steels

Effect of rolling temperature on microstructure and mechanical properties of medium manganese steel

Study on Dynamic Recrystallization of Nb-Microalloyed Steels

The dynamic recrystallization behavior of the Ti-5.5Mo-7.2Al-4.5Zr-2.6Sn-2.1Cr titanium alloy during hot rolling based on macro-meso multiscale crystal plasticity finite element approach

Correlative Analysis of Interaction Between Recrystallization and Precipitation During Sub-Critical Annealing of Cold-Rolled Low-Carbon V and Ti–V Bearing Microalloyed Steels

Modeling of Dynamic Recrystallization Kinetics of a High Strength Low Alloy Steel During Hot Rolling

Investigation of Constitutive Relationship and Dynamic Recrystallization Behavior of 22mnb5 During Hot Deformation

Effect of rare earth microalloying elements on dynamic recrystallization of U71Mn, RE II heavy rail steels

Analytic Numerical Modeling for Thermal Mechanical Processing of Plate under Rolling

Experimental Research on Mathematical Model of Dynamic Recrystallization for 60Si2Mn Steel

Role of Microalloying Elements on Recrystallization Kinetics of Cold-Rolled High Strength Low Alloy Steels