Abstract:This study analyzed the deformation behavior of Nb–Ti microalloyed high strength steel at strain rates of 0.001–0.1 s −1 and deformation temperatures of 1050–1150 °C using hot compression tests. The deformation activation energy of 321.1 kJ/mol was calculated based on the stress-strain curve, and the characteristic points on the flow stress curve were extracted. In contrast, the relationship equation between the characteristic points and the Zener-Hollomon parameter was established. A modified dynamic recrystallization (DRX) kinetics model was proposed based on the stress-strain data, considering the strain rate and deformation temperature. A high-precision constitutive model was established based on the dislocation density evolution phenomenological model, which couples with the modified DRX kinetics model. Furthermore, an improved DRX cellular automaton (CA) model was constructed, which comprehensively took into account a series of processes such as dislocation density evolution, recrystallization nucleation, and grain growth. Notably, the model also embedded the pinning effect of second phase (SP) particles on the DRX process. The improved CA model can control the pinning force by adjusting the size and volume fraction of SP particles and can accurately predict the evolution characteristics of DRX and the average austenite grain size of Nb–Ti microalloyed high strength steels during thermal deformation. The development of an improved CA model can be extended to apply to the DRX evolution of other microalloyed steels, and the model provides a powerful tool and method for understanding the thermal deformation behavior and microstructural evolution of microalloyed steels.

Effect of rare earth microalloying elements on dynamic recrystallization of U71Mn, RE II heavy rail steels

Study on dynamic recrystallization of ultra-high strength 22MnB5 steel during hot rolling

Study on Dynamic Recrystallization of Nb-Microalloyed Steels

Dynamic Recrystallization of Hot Deformed Austenite for Microalloyed Bainitic Engineering Steel

Effects of Deformation Conditions on Dynamic Recrystallization of a Nb Microalloyed Anti-seismic Rebar

Research on Dynamic Recrystallization of the Microalloyed Forging Steels

Modeling of Microstructural Evolution During Dynamic Recrystallization in Coarse Nb Microalloyed Austenite

Effect of Deformation Temperature and Strain on Recrystallization Behavior of a Nb Micro-Alloyed Steel

Investigation on Recrystallization Behavior of Ti-47Al-1.5Re-X (cr, Mn, V, Nb) Alloy During Hot Deformation

Kinetics and microstructure evolution of dynamic recrystallization of medium-Mn steel during hot working

Effect of deformation parameters on the austenite dynamic recrystallization behavior of a eutectoid pearlite rail steel

Segregation of Rare Earth During Isothermal Transformation in Low Carbon Steels

Effect of rare earth elements on microstructure and mechanical properties of bainite/martensite bearing steel

Static and Metadynamic Recrystallization of Low Carbon Steels During Mechanical Deformation

Influence of Alloying Elements on the Dynamic Recrystallization of 4 wt.-% Medium Manganese Steels

Effect of Nb, Ti microalloying on hot deformation behavior of high strength steel

Experimental Investigations and Constitutive Modeling of the Dynamic Recrystallization Behavior of a Novel GH4720Li Superalloys with Yttrium Micro-Alloying

Study of the Dynamic Recrystallization Behavior of Mg-Gd-Y-Zn-Zr Alloy Based on Experiments and Cellular Automaton Simulation

Modeling of Dynamic Recrystallization Kinetics of a High Strength Low Alloy Steel During Hot Rolling

Microstructure evolution and recrystallization kinetics of Al-Cu-Li alloy during thermo-mechanical treatment with overaging and electrically-assisted annealing

An improved cellular automaton model of dynamic recrystallization and the constitutive model coupled with dynamic recrystallization kinetics for microalloyed high strength steels