Abstract:Warm deformation is a plastic-forming process that differs from traditional cold and hot forming techniques. At the macro level, it can effectively reduce the problem of high deformation resistance in cold deformation and improve the surface decarburization issues during the hot deformation process. Microscopically, it has significant advantages in controlling product structure, refining grain size, and enhancing product mechanical properties. The Gleeble-1500D thermal-mechanical physical simulation system was used to conduct isothermal compression tests on GCr15 bearing steel. The tests were conducted at temperatures of 600-1050 °C and strain rates of 0.01-5 s-1. Based on the experimental data, the critical strain model and dynamic recrystallization model for the warm-hot forming of GCr15 bearing steel were established in this paper. The model accuracy is evaluated using statistical indicators such as the correlation coefficient (R). The dynamic recrystallization model exhibits high predictive accuracy, as indicated by an R-value of 0.986. The established dynamic recrystallization model for GCr15 bearing steel was integrated into the Forge® 3.2 numerical simulation software through secondary program development to simulate the compression process of GCr15 warm-hot forming. The dynamic recrystallization fraction was analyzed in various deformation regions. The grain size of the severe deformation zone, small deformation zone, and difficult deformation zone was compared based on simulated compression specimens under the conditions of 1050 °C and 0.1 s-1 with the corresponding grain size obtained with measurement based on metallographic photos; the relative error between the two is 5.75%. This verifies the accuracy of the established dynamic recrystallization and critical strain models for warm-hot deformation of GCr15 bearing steel. These models provide a theoretical basis for the finite element method analysis and microstructure control of the warm-hot forming process in bearing races.

Modeling of Dynamic Recrystallization Kinetics of a High Strength Low Alloy Steel During Hot Rolling

Mathematical modeling for dynamic recrystallization behavior of 40Cr steel

Dynamic Recrystallization Behavior and Constitutive Modeling of As-Cast 30cr2ni4mov Steel Based on Flow Curves

Study on Dynamic Recrystallization Behavior of the High Strength Steel

The modelling of dynamic recrystallization in the isothermal compression of 300M steel

Hot deformation behavior and dynamic recrystallization model of 35CrMo steel

Dynamic Recrystallization Behavior of Microalloyed Forged Steel

The Kinetics and Cellular Automaton Modeling of Dynamic Recrystallization Behavior of a Medium Carbon Cr-Ni-Mo Alloyed Steel in Hot Working Process

Research on Dynamic Recrystallization of the Microalloyed Forging Steels

Dynamic Recrystallization Behavior and Microstructure Evolution of Low-Density High-Strength Fe–Mn–Al–C Steel

Study of Static Recrystallization Kinetics in a Low Alloy Steel

Dynamic Recrystallization Behavior of A Medium Carbon Vanadium Microalloyed Steel

Modeling of Dynamic Recrystallization Evolution for Cr8 Alloy Steel and Its Application in FEM

Experimental Research and Mathematical Model of Dynamic Recrystallization of SWRH82B Steel Austenite

Study on dynamic recrystallization of ultra-high strength 22MnB5 steel during hot rolling

Static Recrystallization Behavior of Twin Roll Cast Low-Carbon Steel Strip

Kinetics of Dynamic Recrystallization of 18 Ni Maraging Steels

Dynamic Recrystallization and Flow Behavior in Low Carbon Nb–Ti Microalloyed Steel

Implementation of Experimental Static Recrystallization of High Strength Steel into Computational Simulation of Multi-pass Slab Hot Rolling

Constitutive equations and dynamic recrystallization behaviors of 20CrNi2Mo steel at stage of high temperature deformation

Finite Element Analysis of Dynamic Recrystallization Model and Microstructural Evolution for GCr15 Bearing Steel Warm-Hot Deformation Process