Abstract:Warm deformation is a plastic-forming process that differs from traditional cold and hot forming techniques. At the macro level, it can effectively reduce the problem of high deformation resistance in cold deformation and improve the surface decarburization issues during the hot deformation process. Microscopically, it has significant advantages in controlling product structure, refining grain size, and enhancing product mechanical properties. The Gleeble-1500D thermal-mechanical physical simulation system was used to conduct isothermal compression tests on GCr15 bearing steel. The tests were conducted at temperatures of 600-1050 °C and strain rates of 0.01-5 s-1. Based on the experimental data, the critical strain model and dynamic recrystallization model for the warm-hot forming of GCr15 bearing steel were established in this paper. The model accuracy is evaluated using statistical indicators such as the correlation coefficient (R). The dynamic recrystallization model exhibits high predictive accuracy, as indicated by an R-value of 0.986. The established dynamic recrystallization model for GCr15 bearing steel was integrated into the Forge® 3.2 numerical simulation software through secondary program development to simulate the compression process of GCr15 warm-hot forming. The dynamic recrystallization fraction was analyzed in various deformation regions. The grain size of the severe deformation zone, small deformation zone, and difficult deformation zone was compared based on simulated compression specimens under the conditions of 1050 °C and 0.1 s-1 with the corresponding grain size obtained with measurement based on metallographic photos; the relative error between the two is 5.75%. This verifies the accuracy of the established dynamic recrystallization and critical strain models for warm-hot deformation of GCr15 bearing steel. These models provide a theoretical basis for the finite element method analysis and microstructure control of the warm-hot forming process in bearing races.

Dynamic Recrystallization Behavior of Low‐Carbon Steel during the Flexible Rolling Process: Modeling and Characterization

Static softening behavior of 316L stainless steel under flexible rolling process

Description of Dynamic Recrystallization Behaviors and Grain Evolution Mechanisms during the Hot Forming Process for SAE 5137H Steel

The kinetics of dynamic recrystallization and construction of constitutive modeling of RAFM steel in the hot deformation process

Microstructure Evolution Modeling and Simulation for Dynamic Recrystallization of Cr12MoV Die Steel During Hot Compression Based on Real Metallographic Image

Effect of Grain Size and Processing Parameters on Critical Strain for Austenite Dynamic Recrystallization

Microstructure simulation and experiment investigation of dynamic recrystallization for ultra high strength steel during hot forging

Evolution of Dynamic Recrystallization in 5CrNiMoV Steel during Hot Forming

Kinetics and microstructure evolution of dynamic recrystallization of medium-Mn steel during hot working

Modeling of Dynamic Recrystallization Evolution for Cr8 Alloy Steel and Its Application in FEM

Modeling and simulation of dynamic recrystallization behavior for Q890 steel plate based on plane strain compression tests

Research on hot deformation, dynamic recrystallization and numerical simulation of Fe–28Mn–10Al–1.5C–0.6V steel

Modeling of Dynamic Recrystallization and Flow Stress of Nb‐Bearing Steels

Modeling of Dynamic Recrystallization Kinetics of a High Strength Low Alloy Steel During Hot Rolling

Constitutive Modeling and Dynamic Recrystallization Mechanisms of an Ultralow-carbon Microalloyed Steel During Hot Compression Tests

An improved cellular automaton model of dynamic recrystallization and the constitutive model coupled with dynamic recrystallization kinetics for microalloyed high strength steels

Study on dynamic recrystallization of ultra-high strength 22MnB5 steel during hot rolling

Revealing the Dynamic Recrystallization Mechanism and Hot Workability of Fe–0.15C–10Mn Medium‐Mn Steel through Grain Size Distribution and 3D Processing Maps

Research on Microstructural Evolution and Deformation Mechanisms in SCM435 Steel Based on a Dynamic Material Model

Hot Deformation Behavior and Microstructural Evolution of a Medium Carbon Vanadium Microalloyed Steel

Finite Element Analysis of Dynamic Recrystallization Model and Microstructural Evolution for GCr15 Bearing Steel Warm-Hot Deformation Process