Abstract:Warm deformation is a plastic-forming process that differs from traditional cold and hot forming techniques. At the macro level, it can effectively reduce the problem of high deformation resistance in cold deformation and improve the surface decarburization issues during the hot deformation process. Microscopically, it has significant advantages in controlling product structure, refining grain size, and enhancing product mechanical properties. The Gleeble-1500D thermal-mechanical physical simulation system was used to conduct isothermal compression tests on GCr15 bearing steel. The tests were conducted at temperatures of 600-1050 °C and strain rates of 0.01-5 s-1. Based on the experimental data, the critical strain model and dynamic recrystallization model for the warm-hot forming of GCr15 bearing steel were established in this paper. The model accuracy is evaluated using statistical indicators such as the correlation coefficient (R). The dynamic recrystallization model exhibits high predictive accuracy, as indicated by an R-value of 0.986. The established dynamic recrystallization model for GCr15 bearing steel was integrated into the Forge® 3.2 numerical simulation software through secondary program development to simulate the compression process of GCr15 warm-hot forming. The dynamic recrystallization fraction was analyzed in various deformation regions. The grain size of the severe deformation zone, small deformation zone, and difficult deformation zone was compared based on simulated compression specimens under the conditions of 1050 °C and 0.1 s-1 with the corresponding grain size obtained with measurement based on metallographic photos; the relative error between the two is 5.75%. This verifies the accuracy of the established dynamic recrystallization and critical strain models for warm-hot deformation of GCr15 bearing steel. These models provide a theoretical basis for the finite element method analysis and microstructure control of the warm-hot forming process in bearing races.

Experimental Research on Mathematical Model of Dynamic Recrystallization for 60Si2Mn Steel

Research on the Dynamic Recrystallization Behavior of 20SiMn

Dynamic Recrystallization Behavior and Constitutive Modeling of As-Cast 30cr2ni4mov Steel Based on Flow Curves

Modeling of Dynamic Recrystallization Kinetics of a High Strength Low Alloy Steel During Hot Rolling

Study on dynamic recrystallization of ultra-high strength 22MnB5 steel during hot rolling

Study on Dynamic Recrystallization of Nb-Microalloyed Steels

Construction of the Recrystallization Model of Low Carbon Steel During Deformation

Static and Metadynamic Recrystallization of Low Carbon Steels During Mechanical Deformation

Modeling of Dynamic Recrystallization Evolution for Cr8 Alloy Steel and Its Application in FEM

The dynamic recrystallization behavior of the Ti-5.5Mo-7.2Al-4.5Zr-2.6Sn-2.1Cr titanium alloy during hot rolling based on macro-meso multiscale crystal plasticity finite element approach

Kinetics and microstructure evolution of dynamic recrystallization of medium-Mn steel during hot working

Research on Dynamic Recrystallization Behavior of 30Cr2Ni4MoV Rotor Steel

Model of Metal Microstructure Evolution Considering Shear Effect and Its Simulation Application in Rolling of Heavy Cylinders

Modelling of Dynamic Recrystallization in Hot Working

Numerical simulation on recrystallization behavior and microstructure evolution during hot continuous rolling process of 38CrMoAl steel rod

Dynamic Recrystallization Critical Conditions and a Physically–Based Constitutive Model of Al–4.8Mg Alloy Under Hot Working Conditions

An Analysis of Dynamic Recrystallization During the Reduction Pretreatment Process Using a Multiscale Model

Structure evolution mechanism and physical modeling of Ni60Ti40 during dynamic recrystallization

Finite Element Analysis of Dynamic Recrystallization Model and Microstructural Evolution for GCr15 Bearing Steel Warm-Hot Deformation Process

Modeling of Dynamic Recrystallization and Flow Stress of Nb‐Bearing Steels

Shaping Microstructure and Mechanical Properties of High-Carbon Bainitic Steel in Hot-Rolling and Long-Term Low-Temperature Annealing