Abstract:We develop a hybrid optofluidic microcavity by placing a microsphere with a diameter ranging from 1 to 4 μm in liquid-filled plano-plano Fabry–Perot (FP) cavities, which can provide an extremely low effective mode volume down to 0.3–5.1 μm3 while maintaining a high Q-factor up to 1×104–5×104 and a finesse of ∼2000. Compared to the pure plano-plano FP cavities that are known to suffer from the lack of mode confinement, diffraction, and geometrical walk-off losses as well as being highly susceptible to mirror misalignment, our microsphere-integrated FP (MIFP) cavities show strong optical confinement in the lateral direction with a tight mode radius of only 0.4–0.9 μm and high tolerance to mirror misalignment as large as 2°. With the microsphere serving as a waveguide, the MIFP is advantageous over a fiber-sandwiched FP cavity due to the open-cavity design for analytes/liquids to interact strongly with the resonant mode, the ease of assembly, and the possibility to replace the microsphere. In this work, the main characteristics of the MIFP, including Q-factor, finesse, effective mode radius and volume, and their dependence on the surrounding medium’s refractive index, mirror spacing, microsphere position inside the FP cavity, and mirror misalignment, are systematically investigated using a finite-element method. Then, by inserting dye-doped polystyrene microspheres of various sizes into the FP cavity filled with water, we experimentally realize single-mode MIFP optofluidic lasers that have a lasing threshold as low as a few microjoules per square millimeter and a lasing spot radius of only ∼0.5 μm. Our results suggest that the MIFP cavities provide a promising technology platform for novel photonic devices and biological/chemical detection with ultra-small detection volumes.

Laser reflow technology on high-Q toroidal microcavity

Fabrication of Optical Cavities with Femtosecond Laser Pulses

High-Q, Low-Mode-volume Microsphere-Integrated Fabry–Perot Cavity for Optofluidic Lasing Applications

A Simple Approach to Fiber-Based Tunable Microcavity with High Coupling Efficiency

Fabrication of Planar Microtoroid Cavities Using High-Power Laser

Fabrication of high-Q microresonators in dielectric materials using a femtosecond laser: Principle and applications

Femtosecond Laser Direct Writing of High-Q Microresonators in Glass and Crystals

Fabrication of Microresonators of High Q/V Ratios Using Femtosecond Laser Micromachining

Monolithic Integration of a High-Quality Factor Lithium Niobate Microresonator with a Free-Standing Membrane Waveguide Using Femtosecond Laser Assisted Ion Beam Writing (FLAIBW)

Toward On-Chip Unidirectional and Single-Mode Polymer Microlaser

Analysis of High-Q Optical Microtoroid Cavity by CO2 Laser

Ultra-high-Q Microcavities Fabricated on Fused Silica Chips by Three-Dimensional Femtosecond Laser Microfabrication

Monolithic Integration of a Lithium Niobate Microresonator with a Free-Standing Waveguide Using Femtosecond Laser Assisted Ion Beam Writing.

High-Q and highly reproducible microdisks and microlasers.

On-chip three-dimensional high-Q microcavities fabricated by femtosecond laser direct writing

Thermal Stress Analysis of the Microtoroid under CO2 Laser

Ultrahigh-Q, Largely Deformed Microcavities Coupled by a Free-Space Laser Beam

Integration of an optical fiber taper with an optical microresonator fabricated in glass by femtosecond laser 3D micromachining

High-Q Photonic Crystal Microcavities

Fabrication of a microresonator-fiber assembly maintaining a high-quality factor by CO2 laser welding

An Efficient Non-Invasive Method to Fabricate In-Fiber Microcavities Using a Continuous-Wave Laser