Abstract:Interfacial charge transfer in the photoactive layer plays an essential role in determining device performance in organic photovoltaics. Recently, numerous studies have reported interfacial modification by incorporating inorganic nanostructures into the bulk heterojunction photoactive layer, with the aim of increasing the interfacial area to improve charge transfer efficiency. However, there is limited understanding of in-depth defect analysis and the charge transfer mechanism. In this report, different weight percentages of LiF were incorporated into MnO2 (LMO) mixed photoactive layers. The robust relationship between charge transport dynamics and defect density of the device in the presence of LiF is elucidated. The results show that the photoactive layer with 10.0 wt% LMO exhibited a 41% improvement in device performance compared to that of pristine P3HT:PC60BM, with a power conversion efficiency (PCE), open-circuit voltage (Voc), short-circuit current density (Jsc), and fill factor (FF) of 2.43%, 0.52 V, 9.77 mA/cm2, and 0.48, respectively. The photovoltaic performance improvement can be attributed to (i) the efficient charge transfer properties in the 10.0 wt% LMO, as evidenced by the suppressed S 2p and intensified O=C in X-ray photoelectron spectroscopy (XPS) analysis, and (ii) the low carrier recombination due to the success of LiF as a surface passivation agent, as indicated by 53% photoluminescence quenching. This report provides a fundamental understanding and offers an alternative solution for designing high-efficiency organic photovoltaics in the near future.

LiF layer at the interface of Au cathode in organic light-emitting devices: A nonchemical induced carrier injection enhancement

Enhancement of Electron Injection in Organic Light-Emitting Devices Using an Ag/LiF Cathode

Buffer-enhanced Electron Injection in Organic Light-Emitting Devices with Copper Cathode

Improving Electron Injection of Organic Light-Emitting Transistors via Interface Layer Design

Enhanced Hole Injection in Organic Light-Emitting Devices by Using Fe3O4 As an Anodic Buffer Layer

Improving Performance Of Deep-Blue Oled By Inserting Ultra-Thin Lif Between Hole-Blocking And Electron-Transporting Layers

Dual Role of Lif As A Hole-Injection Buffer in Organic Light-Emitting Diodes

Effective Intermediate Layers for Highly Efficient Stacked Organic Light-Emitting Devices

Interfacial modification of LiF-incorporated MnO2 mixed P3HT:PC60BM-based organic photoactive layer

Improved Hole Injection And Transport Of Organic Light-Emitting Devices With An Efficient P-Doped Hole-Injection Layer

Fabrication of nucleation induction layer of self-encapsulated metal anode by an atomic layer half-reaction for enhanced flexible OLEDs

The enhanced electron injection by fluorinated tris-(8-hydroxy-quinolinato) aluminum derivatives in high efficient Si-anode OLEDs

Operational stability enhancement in organic light-emitting diodes with ultrathin Liq interlayers

The Interface Analyses Of Inorganic Layer For Organic Electroluminescent Devices

Formation, Confirmation and Application of Li : Al Alloy As an Electron Injection Layer with Li3N As the Precursor

Ultrathin Au Electrodes Based on a Hybrid Nucleation Layer for Flexible Organic Light-Emitting Devices

Efficient Single-Active-Layer Organic Light-Emitting Diodes With Fluoropolymer Buffer Layers

Improvement in performance of organic light-emitting diodes by adjusting charge-carrier mobility in organic/inorganic hybrid hole transporting layer

Control Of Carrier Transport In Organic Semiconductors By Aluminum Doping

Improved Flexibility of Flexible Organic Light-Emitting Devices by Using a Metal/organic Multilayer Cathode

Organic Solar Cell Based on Alkylthiol/Au Self-assembly Film As Buffer Layer