Abstract:Transparent conductive films are important components of organic optoelectronic devices. However, current organic light-emitting devices (OLEDs) used in flexible wearable applications are severely restricted by the fragility and poor conductivity of composing ultra-thin electrodes. In this study, poly(methyl methacrylate) (PMMA)/trimethylaluminum (TMA) was prepared through an atomic layer half-reaction and used as a self-encapsulating nucleation layer. The study suggested coordination between the Au atoms with the functional methyl groups of PMMA/TMA to yield an entire substrate surface. The Au nuclei were evenly and densely distributed on the substrate surface, and island growth of Au film was prevented, leading to good flexibility and photoelectric properties of the Au film deposited on the nucleation layer. For instance, a 7 nm thick layer resulted in a sheet resistance of 18.19 ± 0.44 Ω/◻ at 85.89% transmittance. Furthermore, the use of the as-obtained high-performance electrode in flexible organic optoelectronic devices led to repeated bending over 1000 cycles to a radius of 1 mm without significant reduction in the optoelectronic performances. The nucleation induction layer could also function as a bottom encapsulation with a water vapor transmission rate as low as 2.123 × 10<sup>−3</sup> g/cm<sup>2</sup>/day (60 °C/80% relative humidity). Additionally, the nucleation induction layer exhibited excellent performances in fully transparent devices (75.72% transmittance). In sum, these findings look promising for future flexible wearable applications.

Improved Flexibility of Flexible Organic Light-Emitting Devices by Using a Metal/organic Multilayer Cathode

Flexible Organic Light-Emitting Diodes with ITO/Ag/ITO Multi-Layers As Anodes

Improving the air stability of flexible top-emitting organic light-emitting diodes

Flexible Organic Light-Emitting Diodes with Poly-3,4-ethylene- Dioxythiophene As Transparent Anode

Recent Advances in Organic Light-Emitting Diodes for Flexible Applications

Optimizing the gradient stress sandwich structure thin-film encapsulation for super flexible organic light-emitting devices

Recent Developments in Flexible Organic Light‐Emitting Devices

Highly Flexible and Mechanically Robust Ultrathin Au Grid As Electrodes for Flexible Organic Light-Emitting Devices

Preparation and behavior of flexible organic light emitting diodes

Enhancement of Electron Injection in Organic Light-Emitting Devices Using an Ag/LiF Cathode

Ultra-Smooth and Efficient NiO/Ag/NiO Transparent Electrodes for Flexible Organic Light-Emitting Devices

Flexible alumina films prepared using high-bias pulse power for OLED thin film encapsulation

Fabrication of nucleation induction layer of self-encapsulated metal anode by an atomic layer half-reaction for enhanced flexible OLEDs

Ultrathin Au Electrodes Based on a Hybrid Nucleation Layer for Flexible Organic Light-Emitting Devices

Enhanced flexibility and stability of PEDOT:PSS electrodes through interfacial crosslinking for flexible organic light-emitting diodes

Improved Performance of Organic Light-Emitting Diodes with MgF 2 As the Anode Buffer Layer

Highly transparent and conductive metal oxide/metal/polymer composite electrodes for high-efficiency flexible organic light-emitting devices

Efficient Single-Active-Layer Organic Light-Emitting Diodes With Fluoropolymer Buffer Layers

Flexible organic light-emitting devices with copper nanowire composite transparent conductive electrode

New Hybrid Encapsulation for Flexible Organic Light-Emitting Devices on Plastic Substrates

Highly Transparent Red Organic Light-Emitting Diodes with AZO/Ag/AZO Multilayer Electrode