Abstract:Tube overheating is the leading cause of boiler tube failures that had led to tremendous replacement and maintenance costs. Boiler tube temperature is simultaneously affected by the heating effect of hot combustion gas in the furnace and the cooling effect of steam flow in boiler tubes. Thus, prediction of tube temperature needs to include the simulations of both the gas and steam flows of the boiler in the model. To compromise the significant scale difference between the boiler furnace and tubes, a coupled model that integrates a three-dimensional (3D) CFD model describing the gas flow and combustion processes in the furnace with a one-dimensional (1D) hydrodynamic model describing the steam flow in the boiler waterwall tubes was developed in this paper. The 3D CFD and 1D hydrodynamic models are coupled by iterative data exchange of boiler heat flux and steam temperature between the two models. In this way, this coupled model can incorporate all the key parameters that strongly affect the waterwall tube temperature, including the distributions of boiler heat flux, steam temperature and the convective heat transfer coefficient of steam flow in boiler tubes. In particular, the critical effects of steam maldistribution caused by both the structure of tube network system and uneven heat absorption of parallel tubes on tube temperature can be resolved by this model. This coupled model provides the capability to predict the detailed distribution of waterwall tube temperature and locate the areas of tube overheating under different boiler operating parameters. This coupled model was employed to predict the tube temperature distribution of the spiral waterwall of a 350 MW supercritical boiler. The predicted results show that the areas having higher risk of tube overheating are located near the outlet of spiral waterwall tubes where the steam temperature is the highest and on the wall areas where the local wall heat flux is the highest. The results strengthen the necessity of incorporating both the gas and steam sides of boiler into the model for accurate prediction of waterwall tube temperature.

Creep Rupture Time Predication of a Superheater Wall in a Circulating Fluidized Bed Boile

Machine Learning-Assisted Probabilistic Creep Life Assessment for High-Temperature Superheater Outlet Header Considering Material Uncertainty

Creep-fatigue Endurance of a Superheater Tube Plate under Non-Isothermal Loading and Multi-Dwell Condition

A coupled combustion and hydrodynamic model for the prediction of waterwall tube overheating of supercritical boiler

Cause Analysis of Superheater Tube Cracking in Medium Temperature Separated Circulating Fluidized Bed Boiler

Steam Temperature Characteristics in Boiler Water Wall Tubes Based on Furnace CFD and Hydrodynamic Coupling Model

Influences of Tube Wall on the Heat Transfer and Flow Instability of Various Supercritical Pressure Fluids in a Vertical Tube

A Study of Frictional Resistance Characteristics of High-pressure Steam-water Two-phase Flows

Analysis of Frequent Tube Burst of High Temperature Reheater in 600 MW Unit

Failure analysis of reheater tubes in a 350 MW supercritical circulating fluidized bed boiler

Modelling of a Grade 91 power plant pressurised header weldment under ultra super-critical creep conditions

A Typical Super-Heater Tube Leakage and High Temperature Corrosion Mechanism Investigation in a 260 T/h Circulated Fluidized Boiler

The Experimental Investigation on Flow and Heat Transfer Characteristics of the Rifled Water Wall Tube of an Ultra-supercritical CFB Boiler

Heat Transfer and Frictional Resistance Characteristics of the Water Wall Tube of an Ultra-Supercritical CFB Boiler

Creep behavior analysis on ruptured welds of heat-resistant steels with two different failure modes

Evaluation and Improvement of the Coupled Effect of High-temperature Corrosion-erosion on Water Wall Tubes

Prediction of tube temperature distribution of boiler platen superheater by a coupled combustion and hydrodynamic model

INVESTIGATION ON FRICTIONAL RESISTANCE IN INTERNALLY RIBBED TUBES OF A 600 MW SUPERCRITICAL PRESSURE BOILER

Experimental Investigation on Heat Transfer Characteristics of Smooth Water Wall Tube of an Ultra-Supercritical CFB Boiler

Analysis Of High Temperature Creep On The Nut Connection Components Of A 600mw Supercritical Steam Turbine

Creep behavior and life prediction of a reactor pressure vessel steel above phase‐transformation temperature via a deformation mechanism‐based creep model