Abstract:This paper reports the development of a physics-based life prediction model that incorporates three micro-damage processes. Both the particle area fraction and size, as determined using scanning electron microscopy, are used as the model input to predict the precipitate coarsening damage. Moreover, the carbon concentration profile, as measured using electron probe micro-analyser, are used to derive the carburisation damage distribution index. Compared to the Kowalewski-Dyson model, the present model can predict the stress dependent creep fracture strain and rupture time. The model, compiled into finite element via the user subroutine, can predict the heterogeneous damage accumulation of the cracking furnace tube made of HP40Nb alloy in a coupled creep-carburisation environment. The predicted total damage is comprised of precipitate coarsening and carburisation as the predominance, while the creep cavitation contributing much less due to the low internal pressure. The distribution of the precipitate coarsening is relatively homogeneous through the thickness, whereas the carburisation causes a steep increased damage value close to the inner surface. With regard to time, the precipitate coarsening damage is predominant in the initial stage, while the total damage is governed by the carburisation process with further exposure. Eventually, the total damage reaches the critical value at 59600 h, with the thickness of carburised layer exceeding 50% of the tube thickness, and the tube fails in the inner surface which agrees with the operational experience. The parametric sensitivity study reveals the importance of determining the Cr-rich carbide area fraction for the life prediction.

Two methods for assessment of residual life of HK-40 furnace tubes

Residual Life Assessment on the Reformer Tube Welded with Serviced and New HP.Nb Material

Prediction of furnace tube life based on damage accumulation in unstable operation

Research of Welding Effect on Creep Damage of High Temperature Furnace Tubes

RESIDUE LIFE PREDICTION AND RAPID MAINTENANCE STRATEGIES OF REFORMER FURNACE TUBES

Development of Assessment Techniques for Residual Life of Boiler Tubes Based on the Inner Oxide Thickness

A physics-based life prediction model of HP40Nb heat-resistant alloy in a coupled creep-carburisation environment

Residual Life Assessment of X20CrMoV12.1 Straight Main Steam Pipe in Service

Study on Creep Damage of Weldments of HK40 Furnace Tubes Based on Creep Damage Mechanics

Machine Learning-Assisted Probabilistic Creep Life Assessment for High-Temperature Superheater Outlet Header Considering Material Uncertainty

Assessment of prior fatigue damage and a new approach to predict remanent creep rupture of P92 steel

Remaining Life Evaluation and Maintenance of Service-Exposed HP-Nb Reformer Tubes

Creep-fatigue Endurance of a Superheater Tube Plate under Non-Isothermal Loading and Multi-Dwell Condition

Residual Life Assessment of In-Service High Temperature Components by Small Punch Creep Test

High temperature furnace pipe residue lifetime estimation method and device

Remaining Life of Superheater Elbow Tube by Finite Element Method

A life prediction method and damage assessment for creep-fatigue combined with high-low cyclic loading

Research on Remaining Life Evaluation Method of T92 Steel for Superheater Tube Based on Oxide Layer Growth

On-Line Life Monitoring Technique for Tube Bundles of Boiler High-Temperature Heating Surface

Studies on the damage and the service life calculation model of the fumace fire bars of a heatingg fumace

A Stochastic Computation Model for the Creep Damage of Furnace Tube