Abstract:In this study, the formation processes of TiC in a Cu–Ti–SiC system following the addition of a Ti–SiC mixture into a Cu melt were studied by analyzing the reaction intermediates, and the influence of the synthesis processes on the TiC microstructure was examined. It is found that, upon the addition of Ti–SiC into the Cu melt, the reaction of Ti and Cu to form a Cu–Ti liquid phase occurred first, followed by the reaction between liquid Ti, denoted as Ti(l), and SiC. However, the Ti(l)–SiC reaction processes vary depending on the reaction conditions and significantly influence the microstructures of the TiC particles, especially their dispersion in the Cu matrix. Under certain conditions, such as a lower reaction temperature and larger SiC size, SiC does not directly react with Ti(l). It first transforms into graphite through the outward diffusion of Si; subsequently, the graphite phase reacts with Ti(l) to form TiC. In this case, the synthesized TiC particles tend to connect with each other to form agglomerates. Under conditions conducive to the direct reaction of the Ti(l)–SiC system, such as a higher reaction temperature and smaller SiC size, Ti(l) and SiC first react to form a Ti3SiC2 phase that then decomposes into TiCx and Ti–Si phases and eventually transforms into TiCy (x > y) and amorphous or crystalline Si. In this case, the formed Ti–Si or Si phase can prevent the agglomeration of TiC particles, leading to their more uniform distribution in the prepared Cu matrix composite.

Study of formation behavior of TiC ceramic obtained by self-propagating high-temperature synthesis from Al–Ti–C elemental powders

Preparation of Ti3AlC2 and Ti2AlC by self-propagating high-temperature synthesis and study on the reaction mechanism

In situ fabrication of TiC particulates locally reinforced aluminum matrix composites by self-propagating reaction during casting

In situ synthesis of ZrC particles and its formation mechanism by self-propagating reaction from Al–Zr–C elemental powders

Microstructural Evolution During Self-Propagating High Temperature Synthesis of Ti2AlC Machinable Ceramics

Experimental study on reaction synthesis of TiC in Al-Ti-C system

Effect of Sn and Si on the Synthesis of Ti<sub>3</sub>Al(Sn/Si)C<sub>2</sub> by Self-Propagating High-Temperature Sintering

PREPARATION OF Ti3AlC2 AND Ti2AlC BY SELF-PROPAGATING HIGH-TEMPERATURE SYNTHESIS AND STUDY ON MECHANISM OF THE REACTION

Study on synthesis of TiC in Al/TiC composite materials

Combustion Synthesis and Thermal Stability of Ti3AlC2

Effects of different Ti/C and Al contents on combustion synthesized Ti3AlC2 powders in the Ti-Al-C system

Microstructural evolution during the combustion synthesis of TiC–Al cermet with larger metallic particles

Structure Formation in the Combustion Synthesis of Al2O3–TiC Composites

Formation mechanism of Ti3AlC2 in TiO2–Al–C/TiC systems at high temperatures

Reaction Synthesis Of Nano-Scale Zrc Particulates By Self-Propagating High-Temperature Synthesis From Al-Zr-C Powder Mixtures

Preparation of Ti 3 AlC 2 and Ti 2 AlC by self-propagating high-temperature synthesis

Kinetics and numerical simulation of self-propagating high-temperature synthesis in Ti–Cr–Al–C systems

Growth of TiC Octahedron Obtained by Self-Propagating Reaction

Self-propagation High-temperature Synthesis of Porous TiB2-TiC Multiphase Ceramics

Influence on TiC microstructure from different synthesis processes in the Cu–Ti–SiC system

Reaction synthesis of Al/TiC composites and the effect of Al content