Abstract:Hypothesis: Zirconia microparticles produced by sol-gel synthesis have great potential for photonic applications. To this end, identifying synthetic methods that yield reproducible control over size uniformity is important. Phase transformations during thermal cycling can disintegrate the particles. Therefore, understanding the parameters driving these transformations is essential for enabling high-temperature applications. Particle morphology is expected to influence particle processability and stability. Yttria-doping should improve the thermal stability of the particles, as it does in bulk zirconia. Experiments: Zirconia and YSZ particles were synthesized by improved sol-gel approaches using fatty acid stabilizers. The particles were heated to 1500 °C, and structural and morphological changes were monitored by SEM, ex situ XRD and high-energy in situ XRD. Findings: Zirconia particles (0.4-4.3 μm in diameter, 5-10% standard deviation) synthesized according to the modified sol-gel approaches yielded significantly improved monodispersities. As-synthesized amorphous particles transformed to the tetragonal phase at ∼450 °C with a volume decrease of up to ∼75% and then to monoclinic after heating from ∼650 to 850 °C. Submicron particles disintegrated at ∼850 °C and microparticles at ∼1200 °C due to grain growth. In situ XRD revealed that the transition from the amorphous to tetragonal phase was accompanied by relief in microstrain and the transition from tetragonal to monoclinic was correlated with the tetragonal grain size. Early crystallization and smaller initial grain sizes, which depend on the precursors used for particle synthesis, coincided with higher stability. Yttria-doping reduced grain growth, stabilized the tetragonal phase, and significantly improved the thermal stability of the particles.

Morphological evolution of ZrO2-SiO2 composite gel and stability of tetragonal ZrO2

Synthesis of Monolithic Zirconia with Macroporous Bicontinuous Structure Via Epoxide-Driven Sol–gel Process Accompanied by Phase Separation

Preparation and characterization of ZnO-B2O3-SO2 by sol-gel method

Preparation and Characterization of ZnO-B2O3-SiO2 by Sol-Gel Method

Effect of Al2O3on the Process Performance of ZrO2Microspheres

Synthesis and thermal stability of zirconia and yttria-stabilized zirconia microspheres

Preparation and Thermal Stability of Zirconia-Doped Mullite Fibers Via Sol-Gel Method

Uniform Growth of Colloidal Particles Via Internal Gelation Process

Atomic force microscopy study of the tetragonal to monoclinic transformation behaviour of silica doped yttria-stabilized zirconia

Effects of Zr on the Precursor Architecture and High-Temperature Nanostructure Evolution of Sioc Polymer-Derived Ceramics

Formation mechanism of composite secondary phase particles in a solution-treated Si-modified Zircaloy-4

Tunable Structure of Zirconia Nanoparticles by Biopolymer Gelation: Design, Synthesis and Characterization

Size-driven phase transformation and microstructure evolution of ZrO2 nanocrystallites associated with thermal treatments

Al2O3–SiO2–TiO2 Composite Ceramic Membranes from Sol–gel Processing

Microstructure and Crystallization Behavior of Glasses in the ZrO2-ZnO-Al2O3-SiO2 System

Al2O3 AND ZrO2 CERAMIC MATERIALS OBTAINED BY SOL-GEL METHOD

Structure and fracture behavior of ion-beam-modified SiC-Al2O3-ZrO2 ceramic composites

Microstructure and crystallization behavior of glasses in the ZrO 2-ZnO-Al2O3-SiO2 system

Synthesis of high temperature resistant ZrO2-SiO2 composite aerogels via “thiol-ene” click reaction

Synthesis and Characterization of Si/Ge Composite Nanostructures

Preparation And High-Temperature Strengthening Of Tetragonal Zirconia Mullite Whisker Composites