Abstract:A strain-insensitive temperature sensor based on multimode interference using standard multimode fibers (MMFs) is proposed according to the comprehensive study of the characteristics of the MMFs. The temperature and strain dependences on the core diameter, numerical aperture (NA), and the length of the MMF section in the single-mode--multimode--single-mode (SMS) fiber structure are investigated experimentally. The results indicate that the larger core diameter of the MMF leads to higher temperature sensitivity but lower strain sensitivity (absolute values); the higher NA does not influence the temperature sensitivity but results in higher absolute value of strain sensitivity; the longer MMF section brings lower temperature sensitivity but does not have an impact on strain sensitivity. These findings also contribute to the theoretical analysis of the length dependence in the SMS fiber sensors. Besides, the results of the characterization study show that the strain sensitivity is relatively low, which brings a possibility to develop a strain-insensitive temperature sensor. The proposed sensor is used for temperature sensing while the strain is constantly applied from 0 to 1100 $\mu\epsilon$ with steps of 100 $\mu\epsilon$. The measured results are consistent with the comprehensive study. The mean temperature sensitivity is 6.14 pm/$^{\circ}$C with a standard deviation of 0.39 pm/$^{\circ}$C, which proves that the proposed temperature sensor exhibits good stability and is insensitive to strain. We expect that these results will provide a profound guideline to fiber sensors based on multimode interference.

Numerical Simulation and Experimental Study of All-Fiber Multimode-Interference-Based Strain Sensors

Strain Sensor Based on Gourd-Shaped Single-Mode-multimode-single-mode Hybrid Optical Fibre Structure.

Investigation of a novel SMS fiber based planar multimode waveguide and its sensing performance.

An in-fiber Mach–Zehnder strain sensor for studying multimode interference of light

Fiber-optic multimode interference sensing: comprehensive characterization and its potential for strain-insensitive temperature sensing

Simulation of Optical Microfiber Strain Sensors Based on Four-Wave Mixing

Advances in Optical Fiber Sensors Based on Multimode Interference (MMI): A Review

Sensitivity-enhanced strain sensor based on a shape-modulated multimode fiber

Miniature Fiber-Optic Strain Sensor Based on a Hybrid Interferometric Structure

Temperature and strain simultaneous sensing measurement based on an all-fiber Mach-Zehnder interferometer and fiber Bragg grating

Photonic crystal fiber strain sensor based on multimode/air spherical cavity structure

High Sensitivity Strain Sensor Based on a Novel Offset-Core Single Micro-Tapered Fiber-Optic Mach-Zehnder Interferometer

A strain sensor based on in-line Mach-Zehnder interferometer with thin-core fiber

A Novel Strain Sensor with Large Measurement Range Based on All Fiber Mach-Zehnder Interferometer

High-Sensitivity Microfiber Strain and Force Sensors

A Multiplexed Optical Fiber Sensor System For Distributed Measurement Of Structural Strains

The Strain Sensor with Enhanced Sensitivity Based on Improved Optical Fiber Michelson Interferometer

Ultrasensitive Strain Sensor Based on Mach-Zehnder Interferometer with Bent Structures

Experimental strain modal analysis for beam-like structure by using distributed fiber optics and its damage detection

A Novel MZI Fiber Sensor with Enhanced Curvature and Strain Sensitivity Based on Four-Core Fiber

Optical Fiber Sensor for Temperature and Strain Measurement Based on Multimode Interference and Square-Core Fiber