Abstract:Inverse heat conduction method (IHCM) is one of the most effective approaches to obtaining the boiling heat transfer coefficient from measured results. This paper focuses on its application in cryogenic boiling heat transfer. Experiments were conducted on the heat transfer of a stainless steel block in a liquid nitrogen bath, with the assumption of a 1D conduction condition to realize fast acquisition of the temperature of the test points inside the block. With the inverse-heat conduction theory and the explicit finite difference model, a solving program was developed to calculate the heat flux and the boiling heat transfer coefficient of a stainless steel block in liquid nitrogen bath based on the temperature acquisition data. Considering the oscillating data and some unsmooth transition points in the inverse-heat-conduction calculation result of the heat-transfer coefficient, a two-step data-fitting procedure was proposed to obtain the expression for the boiling heat transfer coefficients. The coefficient was then verified for accuracy by a comparison between the simulation results using this expression and the verifying experimental results of a stainless steel block. The maximum error with a revised segment fitting is around 6%, which verifies the feasibility of using IHCM to measure the boiling heat transfer coefficient in liquid nitrogen bath.

Measurement of Low Temperature Thermal Conductivity of Pure Cu with Helium Refrigerator

Measurement of Thermal Expansion at Low Temperatures Using the Strain Gage Method

The Measurement of RRR and Resistance for Aluminum Alloy Based on a Cryocooler

Investigation Of Helium And Nitrogen Mixtures In A Pulse Tube Refrigerator

Development of High Accuracy PVT Measurement System for Refrigerants

Cryogenic-temperature Thermoacoustically Driven Pulse Tube Refrigerator

Thermal conductivity measurements of solid materials at low temperatures

Measurement of Boiling Heat Transfer Coefficient in Liquid Nitrogen Bath by Inverse Heat Conduction Method

A New Approach for Measurement of the Low-Temperature Specific Heat Capacity

Experimental study on high- low temperature environment simulation chamber with helium gas convection and cooled by liquid nitrogen

Temperature Measurement on Copper Surfaces for Superconducting Thin Film Cavity Applications

CALIBRATION OF LOW-TEMPERTURE THERMOCOUPLES AND RESEARCH ON RELATED NON-LINEAR PHENOMENA

Thermodynamic Temperature Measurements of Silver Freezing Point and Htfps

Test evaluation of rhodium-iron resistance thermometer in cryogenic temperature

Silicon cell for the precise measurement of thermal expansion at low temperatures: Results for Cu and NaF

Quantum dot thermometry at ultra-low temperature in a dilution refrigerator with a $^4$He immersion cell

Dry demagnetization cryostat for sub-millikelvin helium experiments: refrigeration and thermometry

High-precision Photogrammetric Surface Figure Measurements under Cryogenic Environment

Measurement of latent heat of vaporization of liquid nitrogen using computer data acquisition system

Precision measurements of the zero temperature dielectric constant and density of liquid $^4$He