Abstract:The attainment and maintenance of a low temperature environment is essential for aerospace cryogenic detectors to achieve their required performance. Developing cryocoolers with features of high efficiency, compact structure, and long lifetime is the main challenge for cryogenic detector cooling. In this paper, a high efficiency thermally-coupled two-stage Stirling type pulse tube cryocooler working at 35 K for HgCdTe long wave infrared detector cooling is designed and tested. The thermally-coupled type avoids gas distribution at cold side which minimizes the inter-stage influence. The whole cryocooler is driven by one linear compressor which enables compact structure. The influence of operation frequency and mean pressure is studied by numerical calculation and experiments to determine the optimum operation condition. Acoustic impedance characteristics of both stages and the whole cold finger are also analyzed by comparing performance of cryocooler with different frequency, mean pressure and structure dimensions. The distributions of acoustic power and phase angle are presented to study the relation between impedance characteristic and the cooling performance. Impedance match between compressor and cold finger is also discussed by analyzing the efficiency of the linear compressor and the performance of cryocooler with different pulse tubes. Under optimum impedance match and operation condition of a working frequency of 39.2 Hz and a mean pressure of 2.45 MPa, the cryocooler provides a cooling power of 1 W at 35.1 K with an input electrical power of 150 W, which indicates a relative Carnot efficiency of 5%. This is a rather high efficiency for developed Stirling type multi-stage pulse tube cryocooler working at 35 K with only inertance tubes as phase shifter. The development of this cryocooler lays a solid base for the further optimization to realize a competitive candidate for aerospace cooling requirements.

Development of thermal conductivity measurement system based on cryocooler for broad temperature range

EXPERIMENTAL RESEARCH OF THERMAL-COUPLED VERSION HIGH FREQUENCY TWO-STAGE PULSE TUBE COOLER

Advancing Cryogenic Electronic Cooling: A Case Study on Embedded Manifold Microchannels in Micromachined Joule-Thomson Coolers

Numerical Study on the Working Performance of a G-M Cryocooler with a Mechanically Driven Displacer

A Two-Stage Thermally-Coupled Pulse Tube Cryocooler Working at 35 K for Space Application

Variable Temperature Thermal Conductivity and Conductance Measurements Using a Gifford-McMahon Cryocooler

Measurement of Thermal Conductivity of CFRPs and Thermal Conductance of the Cold-to-Warm Joint at Low Temperatures

Micromachined cryogenic cooler for cooling electronic devices down to 30 K

PROGRESS IN THERMAL CONDUCTIVITY TESTING AT CRYOGENIC

Progress in Measuring Techniques and Thermal Radiative Properties of Metals at Cryogenic Temperatures: A Review

Thermal Conductivity Measurement of the Epoxies and Composite Material for Low Temperature Superconducting Magnet Design

Thermal analysis of a 3 T cryogen-free superconducting magnet for electromagnetic property measurement system

Developments in advanced and energy saving thermal isolations for cryogenic applications

Development and Performance Test of 40W/30 K Single Stage G-M Cryocooler with Large Refrigerating Capacity

Performance of cryogenic microbolometers and calorimeters with on-chip coolers

Properties of selected structural and flat flexible cabling materials for low temperature applications

Semi-Dry Cooling Solutions for Future Superconducting Accelerator Structures

Thermal Conductivity Measurement System for Functional and Structural Products

The development and application of high performance G-M cryocooler with new type refrigerative materials

Thermal conductivity measurements of solid materials at low temperatures

Design, microfabrication and measurement of cooling arm for fusion energy source application