Abstract:Well characterised sources of thermal radiation are essential for photometry, radiometry, and thermometry. They serve as reference radiators for the calibration of detectors and radiance sources. Thermal radiation sources are advantageous for this purpose compared to other radiance sources such as lamps or LEDs because they possess a continuous spectrum of the emitted spectral radiance, which, for blackbody sources, can be calculated analytically using Planck’s law of radiation.For application in thermometry, blackbody sources starting from temperatures near absolute zero to temperatures up to 3000 ∘C are needed for the calibration of radiation thermometers. For application in photometry and radiometry high intensity sources of radiation in the visible and UV region of the optical spectrum were required. This latter requirement is met by blackbody sources at temperatures well above 2000 ∘C. An ideal reference source should always emit the same amount of radiation at any time of use. This is realised by fixed-point radiators. Such radiators are based on a phase transition of a substance, at high temperatures the melting and freezing points of metals. However, current metal fixed-points are limited to relatively low temperatures. In the present work innovative techniques necessary for research into high-temperature thermal radiation sources are developed and thoroughly described. Starting with variable temperature blackbody sources the techniques required are: Precise apertures determination and detailed characterisation of the applied optical detectors.The described techniques are then used to undertake research into the development of high-temperature fixed-points above the copper fixed-point for application in photometry, radiometry, and thermometry. Applying these sophisticated techniques it was shown that these new high-temperature fixed-points are reproducible and repeatable to better than 100 mK at temperatures up to nearly 3200 K. Finally, a forward look is given that shows the potential of such fixed-points for improving traceability and accuracy in photometry, radiometry, and thermometry. This work forms the foundation for accurate and practical applications of high-temperature fixed-point sources and sets the international benchmark for measurement techniques in photometry, radiometry, and thermometry. This work will open the use of the novel high-temperature fixed-points in an improved International Temperature Scale and will significantly improve and ease the realisation and dissemination of the SI base unit candela, significantly reducing the uncertainty for industrial measurements in these fields.

Thermodynamic Temperature Measurements of Silver Freezing Point and Htfps

Measurement of radiation temperature with high time-resolution

Analysis of Multi-Factor on Measurement Improvement of an Infrared Imager in Low-Temperature Environments

Study of the Reference Standard Facility of Rhodium-Iron Resistance Thermometer

Metal-carbon eutectic high temperature fixed points for in-situ calibration of radiation thermometers

Estimation of the Degree of Equivalence of the Its-90 above the Silver Point Between Npl, Nim and Cem Using High Temperature Fixed Points

High-temperature measurement techniques for the application in photometry, radiometry and thermometry

A Sapphire Fiber Thermometer for High Temperature Measurement in Tundish Based on the Fast Fourier Transform

Repeatability of a primary thermometer and calibration of resistance thermometers between 5 K and 25 K

An InGaAs Detector Based Radiation Thermometer and Fixed-Point Blackbodies for Temperature Scale Realization at NIM

SIM.T-K9.3: Standard platinum resistance thermometer ITS-90 realizations from the Hg triple point to the Zn freezing point

Comparison report of the ITS-90 realization at the freezing point of silver between NIM and CMS

Measurement of High-Temperature Spectral Emissivity Using Integral Blackbody Approach

Measurement of Low Temperature Thermal Conductivity of Pure Cu with Helium Refrigerator

Infrared cameras are potential traceable "fixed points" for future thermometry studies

A High-Precision Instrumentation of Measuring Thermal Contact Resistance Using Reversible Heat Flux

Spectral Pyrometry for Practical Temperature Measurement in the TEM

Final report for CCT comparison of ITS-90 realisations above the silver point using two transfer radiation thermometers and a set of high temperature fixed-point blackbody cells

A New Interpolation Equation in the ITS-90 Subrange from the Triple Point of Water to the Freezing Point of Indium

Feasibility Analysis on Radiant Transient Heat Flux Meter Calibration System

Resonance frequency measurement with accuracy and stability at the 10-12 level in a copper microwave cavity below 26 K by experimental optimization