Abstract:Well characterised sources of thermal radiation are essential for photometry, radiometry, and thermometry. They serve as reference radiators for the calibration of detectors and radiance sources. Thermal radiation sources are advantageous for this purpose compared to other radiance sources such as lamps or LEDs because they possess a continuous spectrum of the emitted spectral radiance, which, for blackbody sources, can be calculated analytically using Planck’s law of radiation.For application in thermometry, blackbody sources starting from temperatures near absolute zero to temperatures up to 3000 ∘C are needed for the calibration of radiation thermometers. For application in photometry and radiometry high intensity sources of radiation in the visible and UV region of the optical spectrum were required. This latter requirement is met by blackbody sources at temperatures well above 2000 ∘C. An ideal reference source should always emit the same amount of radiation at any time of use. This is realised by fixed-point radiators. Such radiators are based on a phase transition of a substance, at high temperatures the melting and freezing points of metals. However, current metal fixed-points are limited to relatively low temperatures. In the present work innovative techniques necessary for research into high-temperature thermal radiation sources are developed and thoroughly described. Starting with variable temperature blackbody sources the techniques required are: Precise apertures determination and detailed characterisation of the applied optical detectors.The described techniques are then used to undertake research into the development of high-temperature fixed-points above the copper fixed-point for application in photometry, radiometry, and thermometry. Applying these sophisticated techniques it was shown that these new high-temperature fixed-points are reproducible and repeatable to better than 100 mK at temperatures up to nearly 3200 K. Finally, a forward look is given that shows the potential of such fixed-points for improving traceability and accuracy in photometry, radiometry, and thermometry. This work forms the foundation for accurate and practical applications of high-temperature fixed-point sources and sets the international benchmark for measurement techniques in photometry, radiometry, and thermometry. This work will open the use of the novel high-temperature fixed-points in an improved International Temperature Scale and will significantly improve and ease the realisation and dissemination of the SI base unit candela, significantly reducing the uncertainty for industrial measurements in these fields.

An InGaAs Detector Based Radiation Thermometer and Fixed-Point Blackbodies for Temperature Scale Realization at NIM

Analysis of Multi-Factor on Measurement Improvement of an Infrared Imager in Low-Temperature Environments

Development of an Automatic Calibration Device for High-Accuracy Low Temperature Thermometers

An Efficient Temperature Calibration Method Based on the Improved Infrared Forward Model and Bayesian Inference

Research on Large-Area Blackbody Radiation Source for Infrared Remote Sensor Calibration

Measurement of radiation temperature with high time-resolution

Design of Infrared Transfer Standard Radiometer for Medium and Low Temperature Blackbody Calibration

Experimental Research on the Temperature Characterization of a Miniature Phase Change Cells in the Blackbody for the On-Orbit Radiometric Calibration of Thermal Infrared Sensors

A Study on Miniaturized In-Situ Self-Calibrated Thermometers Based on Ga and Ga-Zn Fixed Points

Design of an Extended Area Blackbody for Calibration of Near Infrared Sky Brightness Monitor in the Antarctic

Study of the Reference Standard Facility of Rhodium-Iron Resistance Thermometer

Cryogenic Blackbody Calibration Source for Superconducting Terahertz Detectors

High-temperature measurement techniques for the application in photometry, radiometry and thermometry

Metal-carbon eutectic high temperature fixed points for in-situ calibration of radiation thermometers

Design and Implementation of a Ku-Band High-Precision Blackbody Calibration Target

Design and research on calibration method of multi-channel self-calibration infrared radiation thermometer

Visible and Near-Infrared, Multiparametric, Ultrasensitive Nanothermometer Based on Dual-Emission Colloidal Quantum Dots

Temperature-Automated Calibration Methods for a Large-Area Blackbody Radiation Source

Development Of Infrared Multi-Spectral Radiation Thermometer

Optimal design and calibration of NTC thermistor based temperature measurement system for high temperature application

The Design of High Precision Temperature Control System for InGaAs Short-wave Infrared Detector