Abstract:SiC particle–reinforced Al metal matrix composites (SiCp/Al) are typical difficult-to-machine materials due to the heterogeneous constituent. In order to explore the material removal mechanism in fixed abrasive polishing (FAP), polishing experiments were performed on SiCp/Al at 15 rpm and 35 rpm respectively, and surface integrity, including surface damage and material removal forms, was evaluated to explore the effects of different polishing speeds on it. The results indicate that high-speed polishing at 35 rpm may result in better surface quality. The polished SiC surface changes from a concave cavity to a fish scale shape, and the removal form of SiC particles changes from whole extraction and brittle fracture to ductile removal. A removal model for SiCp/Al in consolidated abrasive polishing was established, and the material removal mechanism was revealed. Simulate the removal of SiC particles at different depths using molecular dynamics simulation. We find dislocations will generate not only at the polishing region but also at the SiC–Al interface. Moreover, the motion of dislocations is obstructed by the nanoparticles, resulting in accumulation of dislocations between the tool and particles. Furthermore, it was found that the removed silicon carbide particles exhibited three-body wear during low-speed polishing, while they turned into two-body wear during high-speed polishing. Material removal rate (MRR) data showed that the standard deviation was reduced by 80% when switching from low-speed to high-speed polishing. This significant decrease underscores that high-speed polishing helps to improve SiCp/Al surface quality. Our researches benefit to understand the mechanical removal mechanism of SiCp/Al substrates and give theoretical guide for improving the machining technology of FAP.

Material Removal Rate of 6H-Sic Crystal Substrate CMP Using an Alumina（al 2 O 3 ） Abrasive

Polishing Mechanism of CMP 4H-SiC Crystal Substrate (0001) Si Surface Based on an Alumina (Al2O3) Abrasive

Chemical Mechanical Polishing (CMP) of On-Axis Si-face 6H-Sic Wafer for Obtaining Atomically Flat Defect-Free Surface

Effect of Process Parameters on Material Removal Rate in Chemical Mechanical Polishing of 6H-SiC(0001)

Material removal rate model for chemical–mechanical polishing of single-crystal SiC substrates using agglomerated diamond abrasive

Chemical effect on the material removal rate in the CMP of silicon wafers

Investigation on Material Removal Mechanisms in Photocatalysis-Assisted Chemical Mechanical Polishing of 4H–SiC Wafers

XPS, UV–vis Spectroscopy and AFM Studies on Removal Mechanisms of Si-face SiC Wafer Chemical Mechanical Polishing (CMP)

Two-Step Chemical Mechanical Polishing of 4H-SiC (0001) Wafer

Chemical Mechanical Planarization (cmp) of On-Axis Si-Face Sic Wafer Using Catalyst Nanoparticles in Slurry

Removal mechanism on 4H–SiC single crystal by picosecond laser ablation-assisted chemical mechanical polishing (CMP)

Application of surface analysis in study on removal mechanism and abrasive selection during fused silica chemical mechanical polishing

Oxidation Anisotropy of 4H-Sic Wafers During Chemical-Mechanical Polishing

AFM and XPS Studies on Material Removal Mechanism of Sapphire Wafer During Chemical Mechanical Polishing (CMP)

Surface modulation to enhance chemical mechanical polishing performance of sliced silicon carbide Si-face

Wear mechanism in nano polishing of SiCp/Al composite materials using molecular dynamics

Chemical Mechanical Polishing of Aluminum Alloys using Alumina-Based Slurry

Optimization of polishing fluid composition for single crystal silicon carbide by ultrasonic assisted chemical-mechanical polishing

Tribochemical mechanisms of abrasives for SiC and sapphire substrates in nanoscale polishing

Investigation of the chemical action mechanism based on reactive force field in SiC chemical–mechanical polishing process

Effect of cations on the improvement of material removal rate of silicon wafer in chemical mechanical polishing