Abstract:The major topology for wireless power transfer is resonant converters, which use fundamental harmonic approximation as a general analysis method. The accuracy of fundamental harmonic approximation (FHA) is unsatisfactory in some wireless power transfer applications, as the current has distortions due to the non-linear diode-bridge rectifier. Some frequency-domain models also consider harmonics beside fundamental component and indeed have a higher resolution. However, due to the difficulty of modeling the non-linear rectifier, most models are oversimplified by assuming a voltage source on the output to eliminate the rectifier. Moreover, the value of the voltage source is often treated as a fixed given number, which is not true for a resistive load. To cover a general case, this paper proposes a frequency-domain analytical model for resonant converters in continuous current mode (CCM) with the capability of considering any load and source situations in kHz frequency range. In terms of computation complexity, the proposed model only involves matrix operation (first-order). A simple algorithm has been chosen to demonstrate the fast convergency and high accuracy of the proposed model. The main findings are verified by the comparison between the theoretical calculation, time-domain simulation and experimental results, where the estimation of output power has 10% improvement than the FHA method.

Model Analysis of 200 W RF Circular Induction Lamp and Equivalent Impedance Simulation Utilizing Orcad Software

Analysis of Electronic Ballast for HID Lamps with Auxiliary Resonant Loop Protection

Analytical Modeling of Resonant Converters in Frequency Domain for Wireless Power Transfer: Continuous Current Mode (CCM) Operation

A fluorescent lamp model based on its physical characteristics

Analysis and Design of Current Auxiliary Circuit for Automotive HID Lamp Ballast

A Physics-Aware Methodology for Equivalent Circuit Model Extraction of TSV-inductors

Modeling and Analysis of Electrodeless Lamp System

Modeling and Analysis of A Novel Igniter for Hid Lamps

Equivalent Radiation Source of 3D Package for Electromagnetic Characteristics Analysis

Analytical Model for the Equivalent Impedances of the Domestic Induction Heating System with Rectangular Cross‐sectional Windings

An Effective Equivalent Radiation Source Based on Near-field Scanning for Electromagnetic Interference Estimation

A Simplified Small-signal Analysis Method for LLC Series Resonant Converter

Simulation the Impedance of Electrodeless Fluoresent Lamp

Modeling for Power Inverter Conducted EMI of Switched Reluctance Starter/Generator

Optimization Design of Linear Induction Motor and Study of the 3-Phase Asymmetry Phenomenon

EMI Noise Analysis for a High-Frequency Power Inductor Model Based PFC Converters

The Derivation of Fluorescent Lamp System Model and Calculation of its Key Parameters

Measurement and Analysis of the Steady-state Impedance Characteristics of High-frequency Electrodeless Lamp

The Improved Equivalent Circuit Models Considering End Effects of Annular Linear Induction Electromagnetic Pump for Space Nuclear Power Supply

Numerical harmonic modelling of low wattage LED lamps based on parameter estimation algorithms

Electromagnetic Radiation Mechanism Analysis and Field Strength Prediction of an Elementary Digital Inverter with Cables