Abstract:In order to regulate the surface properties of calcined kaolinite for the purpose of achieving uniform distribution within various polar dispersion media, 3-aminopropyltriethoxysilane and phenyl glycidyl ether were employed to chemically modify calcined kaolinite. The grafting rate, surface properties, and dispersion properties of calcined kaolinite particles in different polar organic media were changed by varying the dosage of the modifiers. FT-IR analysis confirmed successful surface modification, while thermogravimetric analysis indicated a maximum graft coverage of 18.44 μmol/m2 for the modified particles. Contact angle measurements and particle size distribution analyses demonstrated the effective adjustment of surface characteristics by the modifiers. Specifically, at a mass ratio of 1.0 of modifier to kaolinite particles, the modified particles exhibited a contact angle of around 125°, achieving uniform dispersion in different polarity media. Particle size distribution ranged from 1600 nm to 2100 nm in cyclohexane and petroleum ether, and from 900 nm to 1200 nm in dioxane, ethyl acetate, and DMF, showcasing a significant improvement in dispersion performance compared to unmodified particles. Concurrently, to improve the mechanical properties of PBAT, modified particles were incorporated into the PBAT matrix, and the effect of modified particle addition on the tensile strength and fracture tensile rate of the composites was investigated. The optimal amount of modified particles is 6 wt.%~8 wt.%. This article aims at synthesizing modifier molecules containing different hydrophilic and hydrophobic groups to chemically graft onto the surface of calcined kaolinite. The hydrophilic and hydrophobic groups on the modified particles can adapt to dispersed systems of different polarities and achieve good distribution within them. The modified particles are added to PBAT to achieve good compatibility and enhance the mechanical properties of the composite material.

Composite Modification and Characterization of Calcium Carbonate

The Mechanical and NIR Studies on Ultrafine Calcium Carbonate Treated by Four Surface Modifiers.

The Study on Mechanism, Interfacial Properties of PS-b-PAA Copolymer Coated Calcium Carbonate Particulate

Surface Modification of Nano-calcium Carbonate by Composite Modifier

Mechanism and surface characteristics of polyacrylic acid-coated ultra-fine CaCO3

Surface Modification of Halloysite/Sericite

A novel styrene/maleic anhydride copolymer for polymer modification by SC CO2

Effect of Oleic Acid-modified Nano-CaCO3 on the Crystallization Behavior and Mechanical Properties of Polypropylene

Surface Modification of Calcined Kaolinite for Enhanced Solvent Dispersion and Mechanical Properties in Polybutylene Adipate/Terephthalate Composites

Surface Modification of CaCO3 by Ultrasound-Assisted Titanate and Silane Coupling Agents

Effect of Surface Modification of CaCO_3 on Mechanical Properties of PP/CaCO_3 Composite

Preparation of Poly(methyl Methacrylate)/ultrafine CaCO3 Composite Particles by In-Situ Dispersion Polymerization

Mechanical and Thermal Properties of Polypropylene (PP) Composites Filled with CaCO3 and Shell Waste Derived Bio-Fillers

INFLUENCE OF SURFACE-MODIFICATION FOR CALCIUM CARBONATE ON THE INTERACTION BETWEEN THE FILLERS AND POLYDIMETHYLSILOXANE

Preparation and Characterization of Composites: Ethylene–propylene–diene Terpolymer‐graft‐maleic Anhydride/caco3

Surface Modification Of Caco3 With Dendritic Carboxylic Acids

Preparation and Characterization of Composites: Epdm-G-Aa/Caco3

Study on surface modification of ground calcium carbonate with novel modifier and its PVC filling performance

Surface modification of nanosized biphasic alpha-TCP/HA powders

Synergistic Toughening and Strengthening on PVC by Multimedia Modified Nano-meter CaCO_3/CPE

Change of rheological/mechanical properties of poly(caprolactone)/CaCO3 composite with particle surface modification