A Comparative Study on the Anti-Friction Performance of Amorphous Silicon Films Enhanced by WS2 Nanoflakes
Qunfeng Zeng,Zekun Ning,Jianing Zhu,Zhao Wang,Zeming Pang
DOI: https://doi.org/10.1007/s12633-022-02110-x
IF: 3.4
2022-01-01
Silicon
Abstract:Silicon has been irreplaceable for a long time due to its well-estiblished design and fabrication in the field of Micro-Electro-Mechanical System (MEMS). However, it has poor tribological properties, which limits the further application of actuators (with relative motion) based MEMS. First, the amorphous silicon (a-Si) coatings were prepared on silicon substrates and high-speed steel (HSS) substrates by plasma enhanced chemical vapor deposition, and the relationships between mechanical properties and tribological performance were also systematically discussed. The wear rate of a-Si film on HSS has decreased significantly (decreased by 81.55%) compared with a-Si coating on silicon, which can be attributed to the larger elastic modulus and hardness of a-Si on the HSS matrix. Then, tungsten disulfide (WS2) nanoflake coatings with low interlayer shear stress were successfully prepared on the amorphous silicon (a-Si) coatings by the drop-casting method, forming a WS2 + a-Si coating to enhance the tribological properties. Combined with first-principles simulations and the characterization of the wear scar morphology, the macro-scale sliding friction of this composite coating against the Al2O3 ceramic ball was investigated in ambient air. The results indicated that the introduction of WS2 nanoflakes reduces the coefficient of friction (CoF) from 0.5 to 0.08. The reduction in CoF could be attributed to the in-situ formation of WS2 lubricating transfer film on the wear scar of the ball and the WS2 heterogeneous interface on a-Si film, leading to asymmetric contact between the friction pairs, which in turn triggers low and stable friction.