Abstract:Single stage G-M cryocoolers (GMCs) with high cooling capacity at 20-50 K provide significant benefit for the field of high temperature superconductors, however, their working efficiency can still be improved for commercial applications. Numerical simulations can serve as a valuable guide for precise optimization of the GMC because they allow one to study its internal operating characteristics. In this research, a twodimensional, transient model of a single stage GMC with a mechanically driven displacer is built and studied using computational fluid dynamics (CFD) simulation. The modelling method has been tested and experimentally verified. It enables a view of the instantaneous non-uniform flow and temperature distributions inside the GMC. Additionally, the effects of cold end channels on the heat transfer efficiency of the cold heat exchanger while operating at a large cooling power are analyzed. The results show that during certain periods of a cycle, most of the regenerator near the cold end remains at almost the same low temperature with no temperature gradient due to the small heat capacity of the materials compared to that of the helium gas; while most of the pressure drop occurs in the region near the hot end due to the high viscosity of helium-4. For a good cooling performance at low temperatures, the cold end channels should be distributed uniformly to guarantee a uniform flow and temperature distribution in the regenerator; while for a high output cooling power at high temperatures, they should be designed to enhance the heat exchange between the gas and the cold heat exchanger as much as possible. (C) 2017 Elsevier Ltd. All rights reserved.

Experimental investigation of the double-inlet on the cooling performance of a single-stage G-M type pulse tube cryocooler

Experimental investigation on DC flow suppression and refrigeration characteristics of a high-performance single-stage GM-type

EXPERIMENTAL RESEARCH OF THERMAL-COUPLED VERSION HIGH FREQUENCY TWO-STAGE PULSE TUBE COOLER

Investigation on High-Performance Single-Stage GM-Type Pulse Tube Cooler

Improvement of a Stirling type two-stage pulse tube cryocooler

Experimental Results of the Internal Process of A Double Inlet Pulse Tube Refrigerator

DC FLOW SUPPRESSION IN A SINGLE-STAGE G-M TYPE PULSE TUBE COOLER

Generation Mechanism of DC Flow in Double-Inlet Pulse Tube Coolers

Refrigeration characteristic experiment in 40 K region of a two-stage pulse tube cryocooler driven by a standing wave thermoacoustic engine

Experimental Investigation On Dc Flow Control In A Single-Stage Pulse Tube Refrigerator Operating Below 20k

Numerical Study on the Working Performance of a G-M Cryocooler with a Mechanically Driven Displacer

Development of a two-stage pulse tube Stirling cryocooler

15 K Two-Stage Stirling-Type Pulse-Tube Cryocooler

Study on a single-stage pulse tube with two-valve double-inlet configuration

Experimental study on a three-stage cascade pulse tube cryocooler with transmission tube

Numerical Analysis of Different Valve Effects on the Cooling Performance of A Two-Stage Gm Type Pulse Tube Cryocooler

Numerical Simulation of a GM-type Pulse Tube Cryocooler System: Part II. Rotary Valve and Cold Head

A Pulse Tube Cryocooler with A Cold Reservoir

Study on G-M Type Pulse Tube Cryocooler with a Novel Active Gas Distribution System

Experiment on a Single-stage GM Type Pulse Tube Cryocooler near 20K

Thermal performance of a single stage double inlet pulse tube refrigerator: experimental investigation and CFD simulation