Abstract:Abstract Rotating stall is an unsteady flow phenomenon in flow rate reduction process of axial compressor. Single or multiple stall cells can be found in blade passage, rotating circumferentially at frequency ranging from 20% to 80% of compressor rotating frequency. Rotating stall may further lead to surge, then mass flow and pressure ratio of the compressor decrease rapidly while vibration amplitude of bearing fulcrum increases significantly, which would affect safety operation of the aero-engine. This paper reports the study on a multistage compressor with special-shaped aggressive flow path, which is significantly different from the conventional compressor with its meridian flow path midline parallel or nearly parallel to the rotating shaft axis. To study rotating stall and surge characteristics of multistage compressor with inlet distortion, this paper takes a 4.5-stage axial compressor as research object which has special S-shaped meridian flow path. On SJTU compressor test facility, the author carries out multidisciplinary tests on compressor dynamic performance (stator LE/TE and inter-stage fluctuating pressure measured by fluctuating pressure transducers, vibration measured by acceleration transducers, and dynamic stress measured by pasting strain transducers on the surface of stator blade). And in subsequent surge experiment, stall and surge signals at different rotating speeds are successfully captured. With above test data, axial, radial and circumferential instability development characteristics are studied by time domain correlation analysis, frequency domain power spectrum and coherence analysis, which preliminarily reveals the generation, development, propagation and elimination characteristics of rotating stall and surge. Meanwhile, in view of time-frequency characteristics of two instability transition processes, time-frequency analysis method based on Choi-Williams distribution model is adopted to capture instantaneous frequency characteristics. The results show that instability phenomenon exhibits quasi-exponential change in instability transition processes. Compared with traditional methods, time-frequency method is more effective in characterizing strong time-varying instability signals such as rotating stall and surge.

Analysis and Troubleshooting of Intermittent Vibration Fluctuation for an Axial Compressor

Fault Analysis and Troubleshooting of Oil-film Oscillation for An Axial Compressor

Quantitative Analysis of Energy Loss and Vibration Performance in a Circulating Axial Pump

Dynamic analyses for the rotor-journal bearing system of a variable speed rotary compressor

Modal Analysis of the Rotor-Journal Bearing System of Rotary Compressor

Vibrational analyses of thrust bearing-rotor system in a turboexpander

Analysis and treatment of common vibration troubles of turbine compressor

Investigations of Rotating Instability and Fluctuating Tip Clearance Flow in a Low-Speed Axial Compressor

Analysis of Transient Vibration of Single-Thick-disk Rotor Crossing Two Orders of Critical Speeds

Nonsynchronous Vibrations of Rotor System with an Oil-Block inside the Rotating Drum

Vibration Analysis and Control of a Screw Compressor Outlet Piping System

Nonlinear Vibration Feature Recognition Method for Reciprocating Compressor Cylinder Based on VMD-Multifractal Spectrum

Vibration and pressure pulsation elimination in a reciprocating compressor suction system using an acoustic filter

Investigation on the Flow Field Entropy Structure of Non-Synchronous Blade Vibration in an Axial Turbocompressor

Numerical Investigation of Subsynchronous Vibration in Floating Ring Bearings

Experimental and Numerical Study of Nonlinear Vibration in Compressor Stator Blade with Holding Ring Structure Considering Contact Friction

The Investigation of Axial Compressor With Aggressive Flow Path Near Stall Condition

Investigation on Axial Displacement Fault Mechanism Based on Dynamic Characteristic Coefficients Identification of Tilting-Pad Thrust Bearing

Analysis and treatment of vibration trouble of turbine expander rotor system

Analysis And Redesign Of The Fractured Blade In An Axial Compressor

Solution for the Torsional Vibration of the Compressor Shaft System with Flexible Coupling Based on a Sensitivity Study