Abstract:High vibration poses significant safety and operational risks to compressor components. This study presents a thorough investigation of the root causes analysis and corrective actions to resolve vibration-induced failures faced on the suction system of a reciprocating compressor. Excessive pressure pulsations in the suction bottle and strong mechanical coupling between the cylinders and suction bottle due to high cylinder gas forces were identified as the root causes of vibration-induced failure of the suction system. The proposed solutions to eliminate this problem were implemented by splitting the suction bottle into two parts and making one bottle as an acoustic filter (Helmholtz resonator). The acoustic filter was optimized for the suppression of pressure pulsations above its Helmholtz frequency and also for the avoidance of acoustic and mechanical resonance. After applying the proposed solutions, the modified suction system achieved a 14.3-61.1% reduction in vibration and a 75.56% reduction in peak-to-peak pressure pulsation for the compressor operating at 1000 rpm. The processing capacity of the compressor has been increased by 6.82%. An acoustic filter is an effective low-cost technical measure for reduction of pressure pulsation and fluid-induced vibration, which greatly increases the reliability of the entire compressor system.

Vibration Analysis and Rebuilding for Superhigh Pressure Reciprocating Compressor

Numerical Analysis of Noise Radiation from Refrigerator Compressor Shell

Vibration and Noise Research on Oxygen Generator and Structural Optimization

Analysis and Controlling of Pipeline Vibration in Chemical Plant

Noise Analysis and Control of Reciprocating Refrigerators Compressor

Numerical Analysis Of Noise Radiation Of Compressor Shell Considering Lubrication Oil

Numerical analysis of the influence of lubrication oil on noise radiation of compressor shell

Numerical Simulation and Structure Optimization of Compressor Muffler

Vibration analysis of BX32-20/2T2-100 reciprocating compressor

Vibration and pressure pulsation elimination in a reciprocating compressor suction system using an acoustic filter

A Hybrid Lumped Parameters/Finite Element/Boundary Element Model to Predict the Vibroacoustic Characteristics of an Axial Piston Pump

Vibration Tests and Crack Analyses on Multi-Storeys Industrial Factory Buildings

Finite element analysis and topology optimization of direct-drive compressor valve

Dynamic Balancing Modal Analysis and Vibration Suppressing Design for Reciprocating Compressor Crankshaft

Numerical and Experimental Studies on Housing Optimization for Noise Reduction of an Axial Piston Pump

Finite Element Analysis of Reciprocating Sealing Component of Radial Single-piston Pump

Study on Vibration Tracing and Vibration Reduction Technology of Reciprocating Compressor Pipeline

Dynamic Analysis and Treatment of Vibration Reduction for A Broken Floor in Thermal Power Plant

Experimental and numerical study of high-intensity sound in the cavity between rotator and stator of high- pressure compressor

Finite Element Analysis of Aeroengine Compressor Disc Based on ANSYS

Modeling and Performance Analysis of Rotary Compressor Considering Multi-Body Coupling and Bearing Deformation