Abstract:In this paper, we study the deformation behavior of nickel-based superalloys by in-situ EBSD and uniaxial tensile tests. This study mainly focuses on the microstructure evolution in the same area of the sample during deformation, including the evolution of various types of grain boundaries, geometrically necessary dislocations, grain orientations and texture, and their effect on the mechanical properties. The results show that the rotation of grains is closely related to their initial orientation during deformation. The lattice of grain is rotated to a certain extent to accommodate the more favorable orientation under low strain, leading to higher Schmid factors for the sample. Under large stresses, the grains occur deformation, multiple slip systems start simultaneously or alternately and the Schmid factors value gradually tends to stabilize at a lower level. Meanwhile, the texture orientation density of the initial Rotating cubic {001} texture, α-fiber (RD// ) texture, and γ-fiber (ND // ) gradually decrease or even disappears, while the texture orientation density of Copper {112} and Goss {011} increases during uniaxial tensile deformation for Cr20Ni80 alloy. Grain rotation may be a result of large strain due to stress triaxiality and resulting plane stress condition owing to specimen dimension, which is beneficial to improve the plastic deformability of the alloy. Interestingly, with the increase of strain, the average misorientation angle first decreases and then increases, which is associated with the dislocation density. In addition, serious torsion occurs in the grains during this process, forming a large number of substructures. These substructures result in grain refinement and the Hall-Petch effect. In fact, during the deformation process, multiple strengthening mechanisms act in coordination, leading to an increase in the strength of the alloy.

Deformation Strain Inhomogeneity in Columnar Grain Nickel

Evolution of Orientations and Deformation Structures Within Individual Grains in Cold Rolled Columnar Grained Nickel

Tensile Deformation Behaviors of CuNi Alloy Processed by Equal Channel Angular Pressing

Texture and Deformation Structure Evolution During Rolling of Individual Grains of Columnar Grain Nickel

Abnormal Grain Growth: A Potential Way to Construct Gradient Structure

Effect of Grain Size on Deformation and Fracture of Inconel718: an In-Situ SEM-EBSD-DIC Investigation

Investigation of Deformation Microstructures in Spark Plasma Sintered Nickel

Grain Orientation Induced Softening in Electrodeposited Gradient Nanostructured Nickel during Cold Rolling Deformation

Evolution of microstructural parameters and flow stresses toward limits in nickel deformed to ultra-high strains

In-situ EBSD study of deformation behavior of nickel-based superalloys during uniaxial tensile tests

Microstructure–grain Orientation Relationship in Coarse Grain Nickel Cold-Rolled to Large Strain

Effects of Strain on Recrystallization of Nickel Metals and Nanometals Produced by Heavy Cold Rolling

The deformation mechanism of nanocrystalline nickel under high strain rate

The Orientations of Nuclei at Triple Junctions in Deformed Columnar Grain Ni

Effect of Applied Stress on Vacancy Segregation Near the Grain Boundary in Nickel

Local Deformation Mechanisms in Metal Systems with a Tailored Grain Size Distribution

The correlation between slip systems and dislocation structures in tensile-rolled nickel

Orientation-Dependent Characteristics for Residual Grains During Hot Deformation of Nickel-Based Alloy 925

Deformation induced columnar grain rotation in nanotwinned metals

Comparison in Deformation Behavior, Microstructure, and Failure Mechanism of Nickel Base Alloy 625 under Two Strain Rates

Recovery in heavily deformed nickel during room temperature storage