Abstract:The preparations and performances of the novel amperometric biosensors for glucose based on immobilized glucose oxidase (GOD) on modified Pt electrodes are described. Two types of modified electrodes for the enzyme immobilization were used in this study, polyvinylferrocene (PVF) coated Pt electrode and gold deposited PVF coated Pt electrode. A simple method for the immobilization of GOD enzyme on the modified electrodes was described. The enzyme electrodes developed in this study were called as PVF-GOD enzyme electrode and PVF-Au-GOD enzyme electrode, respectively. The amperometric responses of the enzyme electrodes were measured at constant potential, which was due to the electrooxidation of enzymatically produced H2O2. The electrocatalytic effects of the polymer, PVF, and the gold particles towards the electrooxidation of the enzymatically generated H2O2 offers sensitive and selective monitoring of glucose. The biosensor based on PVF-Au-GOD electrode has 6.6 times larger maximum current, 3.8 times higher sensitivity and 1.6 times larger linear working portion than those of the biosensor based on PVF-GOD electrode. The effects of the applied potential, the thickness of the polymeric film, the amount of the immobilized enzyme, pH, the amount of the deposited Au, temperature and substrate concentration on the responses of the biosensors were investigated. The optimum pH was found to be pH 7.4 at 25 degrees C. Finally the effects of interferents, stability of the biosensors and applicability to serum analysis of the biosensor were also investigated.

An Amperometric Biosensor for Glucose Based on Electrodeposited Redox Polymer/Glucose Oxidase Film on a Gold Electrode

A glucose oxidase sensor based on screen-printed carbon electrodes modified by polypyrrole.

An interference-free glucose biosensor based on an anionic redox polymer-mediated enzymatic oxidation of glucose.

An Amperometric Glucose Biosensor Based on Layer-by-layer GOx-SWCNT Conjugate/redox Polymer Multilayer on a Screen-Printed Carbon Electrode

Glucose Biosensor Based on Immobilization of Glucose Oxidase in Electrochemically Polymerized Polytyramine Film and Overoxidised Polypyrrole Film on Platinized Carbon Paste Electrode

Glucose Nanosensors Based on Redox Polymer/glucose Oxidase Modified Carbon Fiber Nanoelectrodes

A Stable Glucose Biosensor Prepared by Co-Immobilizing Glucose Oxidase into Poly(p-Chlorophenol) at a Platinum Electrode.

Application of Polypyrrole/gox Film to Glucose Biosensor Based on Electrochemical-Surface Plasmon Resonance Technique

An Amperometric Glucose Biosensor Incorporating A Permeable Pre-Oxidation Layer

An Amperometric Biosensor Based on Glucose Oxidase Immobilized in A Sol-Gel Polyvinyl Alcohol/Silica Hybrid Composite Film on A Prussian Blue Modified Electrode

An Amperometric Glucose Biosensor Based On Poly(O-Aminophenol) And Prussian Blue Films At Platinum Electrode

Amperometric Glucose Sensor Based on Coimmobilization of Glucose Oxidase and Poly(p-phenylenediamine) at a Platinum Microdisk Electrode

A Biosensor Prepared by Co-Entrapment of a Glucose Oxidase and a Carbon Nanotube Within an Electrochemically Deposited Redox Polymer Multilayer.

Development of an amperometric glucose biosensor based on the immobilization of glucose oxidase in an ormosil-PVA matrix onto a Prussian Blue modified electrode

An reagentless glucose biosensor based on direct electrochemistry of glucose oxidase immobilized on poly(methylene blue) doped silica nanocomposites

Amperometric glucose biosensor based on gold-deposited polyvinylferrocene film on Pt electrode

Fabrication and Analytical Characterization of Osmium Redox Polymer Based Biosensor to Low Concentration Glucose

Amperometric Glucose Biosensor Based on AuPd Modified Reduced Graphene Oxide/Polyimide Film with Glucose Oxidase

An Amperometric Glucose Biosensor Based on Glucose Oxidase Immobilized in Electropolymerized Poly(o-aminophenol) and Carbon Nanotubes Composite Film on a Gold Electrode

Amperometric glucose sensor based on glucose oxidase immobilized in electrochemically generated poly(ethacridine)

An amperometric biosensor for glucose based on self-assembling nanoparticles and electrosynthesis of poly-o-diaminobenzene on the Prussian blue-modified gold electrode