Abstract:The immobilization of glucose oxidase (GOD) via its dip-dry coating on a Prussian blue (PB) modified Au electrode followed by deposition of an outer poly(o-phenylenediamine) (PoPD) film and then glutaraldehyde (GA) cross-linking was investigated for amperometric glucose sensing, based on the reduction of enzymatically generated H2O2 catalyzed by the electroactive PB layer of the PoPD/GOD-GA/PB/Au electrode. The quartz crystal microbalance (QCM) was used to monitor various electrode-modification processes, and the effective enzymatic specific activity (ESA, defined as enzymatic activity per gram of enzyme) of immobilized GOD was estimated based on the mass of immobilized GOD (from QCM) and the quantity of hydrogen peroxide as the product of the enzymatic reaction (from amperometric detection) for the first time. The ESA of native GOD under our experimental conditions was also estimated via amperometric detection of enzymatically generated H2O2 at a PB-modified Au electrode. Effects of various experimental parameters on glucose sensing, including the applied potential, solution pH and electroactive interferents, were investigated. At an optimal potential of −0.05V versus saturated KCl calomel electrode (SCE), the current response of the biosensor in the selected phosphate buffer (pH 7.0) was linear with glucose concentration from 0.05 to 10mmolL−1, with detection limit of 8μmolL−1, short response time (within ∼5s) and good anti-interferent ability. The Michaelis constant (Kmapp) of the immobilized GOD was estimated as 19.6mmolL−1. The biosensor exhibited good storage stability, i.e., 88% of its initial response was retained after 30-day storage in pH 7.0 phosphate buffer at 4°C. Since the present sensor-fabrication platform is rather general and advantageous in saving biochemical reagents, it is recommended for the development of other biosensors based on other substrate electrode materials, e.g. glassy carbon that has been tested in this work with satisfactory results.

Development of an amperometric glucose biosensor based on the immobilization of glucose oxidase in an ormosil-PVA matrix onto a Prussian Blue modified electrode

A glucose oxidase sensor based on screen-printed carbon electrodes modified by polypyrrole.

Development and application of a glucose biosensor based on Prussian Blue modified screen-printed electrode

An Amperometric Biosensor Based on Glucose Oxidase Immobilized in A Sol-Gel Polyvinyl Alcohol/Silica Hybrid Composite Film on A Prussian Blue Modified Electrode

Glucose biosensor based on glucose oxidase immobilized in sol–gel chitosan/silica hybrid composite film on Prussian blue modified glass carbon electrode

New Glucose Biosensor Based on a Poly(o-Phenylendiamine)/glucose Oxidase-Glutaraldehyde/prussian Blue/au Electrode with QCM Monitoring of Various Electrode-Surface Modifications

Amperometric Glucose Biosensor Based on Direct Assembly of Prussian Blue Film with Ionic Liquid-Chitosan Matrix Assisted Enzyme Immobilization

An Amperometric Glucose Biosensor Based On Poly(O-Aminophenol) And Prussian Blue Films At Platinum Electrode

Development of amperometric glucose biosensor through immobilizing enzyme in a Pt nanoparticles/mesoporous carbon matrix.

Glucose Biosensor Based on the Highly Efficient Immobilization of Glucose Oxidase on Prussian Blue-Gold Nanocomposite Films

An Amperometric Glucose Biosensor Based on Titania Sol-gel/Prussian Blue Composite Film

An amperometric biosensor for glucose based on self-assembling nanoparticles and electrosynthesis of poly-o-diaminobenzene on the Prussian blue-modified gold electrode

A Stable Glucose Biosensor Prepared by Co-Immobilizing Glucose Oxidase into Poly(p-Chlorophenol) at a Platinum Electrode.

An reagentless glucose biosensor based on direct electrochemistry of glucose oxidase immobilized on poly(methylene blue) doped silica nanocomposites

Preparation of GOD/Sol-Gel Silica Film on Prussian Blue Modified Electrode for Glucose Biosensor Application

Amine-terminated organosilica nanosphere functionalized Prussian blue for the electrochemical detection of glucose.

Glucose Biosensor Based on Immobilization of Glucose Oxidase in Electrochemically Polymerized Polytyramine Film and Overoxidised Polypyrrole Film on Platinized Carbon Paste Electrode

Development Of Amperometric Biosensor For Glucose Based On A Novel Attractive Enzyme Immobilization Matrix: Calcium Carbonate Nanoparticles

An Amperometric Biosensor for Glucose Based on Electrodeposited Redox Polymer/Glucose Oxidase Film on a Gold Electrode

Planar Amperometric Glucose Sensor Based on Glucose Oxidase Immobilized by Chitosan Film on Prussian Blue Layer

Glucose Biosensor Based on Covalent Immobilization of Enzyme in Sol–gel Composite Film Combined with Prussian Blue/carbon Nanotubes Hybrid