Abstract:The immobilization of glucose oxidase (GOD) via its dip-dry coating on a Prussian blue (PB) modified Au electrode followed by deposition of an outer poly(o-phenylenediamine) (PoPD) film and then glutaraldehyde (GA) cross-linking was investigated for amperometric glucose sensing, based on the reduction of enzymatically generated H2O2 catalyzed by the electroactive PB layer of the PoPD/GOD-GA/PB/Au electrode. The quartz crystal microbalance (QCM) was used to monitor various electrode-modification processes, and the effective enzymatic specific activity (ESA, defined as enzymatic activity per gram of enzyme) of immobilized GOD was estimated based on the mass of immobilized GOD (from QCM) and the quantity of hydrogen peroxide as the product of the enzymatic reaction (from amperometric detection) for the first time. The ESA of native GOD under our experimental conditions was also estimated via amperometric detection of enzymatically generated H2O2 at a PB-modified Au electrode. Effects of various experimental parameters on glucose sensing, including the applied potential, solution pH and electroactive interferents, were investigated. At an optimal potential of −0.05V versus saturated KCl calomel electrode (SCE), the current response of the biosensor in the selected phosphate buffer (pH 7.0) was linear with glucose concentration from 0.05 to 10mmolL−1, with detection limit of 8μmolL−1, short response time (within ∼5s) and good anti-interferent ability. The Michaelis constant (Kmapp) of the immobilized GOD was estimated as 19.6mmolL−1. The biosensor exhibited good storage stability, i.e., 88% of its initial response was retained after 30-day storage in pH 7.0 phosphate buffer at 4°C. Since the present sensor-fabrication platform is rather general and advantageous in saving biochemical reagents, it is recommended for the development of other biosensors based on other substrate electrode materials, e.g. glassy carbon that has been tested in this work with satisfactory results.

An amperometric biosensor for glucose based on self-assembling nanoparticles and electrosynthesis of poly-o-diaminobenzene on the Prussian blue-modified gold electrode

Glucose Biosensor Based on a Platinum Electrode Modified with Rhodium Nanoparticles and with Glucose Oxidase Immobilized on Gold Nanoparticles

A glucose oxidase sensor based on screen-printed carbon electrodes modified by polypyrrole.

Glucose Biosensor Based on Self-Assembled Gold Nanoparticles and Double-Layer 2D-Network (3-Mercaptopropyl)-trimethoxysilane Polymer Onto Gold Substrate

Glucose Biosensor Based on the Highly Efficient Immobilization of Glucose Oxidase on Prussian Blue-Gold Nanocomposite Films

Amperometric Glucose Biosensor Based on Effective Self-Assembly Technology for Preparation of Poly(allylamine hydrochloride)/Au Nanoparticles Multilayers.

Amperometric glucose biosensors based on layer-by-layer assembly of chitosan and glucose oxidase on the Prussian blue-modified gold electrode

Bienzymatic glucose biosensor based on direct electrochemistry of cytochrome c on gold nanoparticles/polyaniline nanospheres composite.

A Sensitive and Selective Biosensor Activated by Tailor-Designed Platinum Nanoparticles Electrodeposited Onto A Gold Microelectrode

Amperometric Glucose Biosensor Based on Electrodeposition of Platinum Nanoparticles Onto Covalently Immobilized Carbon Nanotube Electrode.

Amperometric Glucose Biosensor Based on Prussian Blue–multiwall Carbon Nanotubes Composite and Hollow PtCo Nanochains

An Amperometric Glucose Biosensor Based on Glucose Oxidase Immobilized in Electropolymerized Poly(o-aminophenol) and Carbon Nanotubes Composite Film on a Gold Electrode

An Amperometric Glucose Biosensor Based On Poly(O-Aminophenol) And Prussian Blue Films At Platinum Electrode

Glucose Biosensor Based on the Fabrication of Glucose Oxidase in the Bio‐Inspired Polydopamine‐Gold Nanoparticle Composite Film

A Glucose Biosensor Based on Chitosan–prussian Blue–multiwall Carbon Nanotubes–hollow PtCo Nanochains Formed by One-Step Electrodeposition

A Novel Glucose Biosensor Based on Direct Electrochemistry of Glucose Oxidase Incorporated in Biomediated Gold Nanoparticles–carbon Nanotubes Composite Film

A Simple Method to Fabricate a Prussian Blue Nanoparticles/carbon Nanotubes/poly(1,2-Diaminobenzene) Based Glucose Biosensor

New Glucose Biosensor Based on a Poly(o-Phenylendiamine)/glucose Oxidase-Glutaraldehyde/prussian Blue/au Electrode with QCM Monitoring of Various Electrode-Surface Modifications

Novel Glucose Oxidase Interlocked Prussian Blue/Polysulfone Stereo-Structure and its Application in Amperometric Glucose Biosensor

A new biosensor for glucose based on Au colloid modified electrode and poly-azure mediation

A Novel Amperometric Glucose Biosensor Based on Ternary Gold Nanoparticles/polypyrrole/reduced Graphene Oxide Nanocomposite