Abstract:The direct electron transfer and enzyme catalytic activity were investigated in electrochemical biosensor based on glucose oxidase (GOx) and electrochemical reduced graphene oxide-poly-(L-lysine) (ERGO-PLL) hybrid composite film embedded in a biocompatible matrix of Nafion. The ERGO-PLL was fabricated onto glassy carbon electrode (GCE) through one step electrodeposition of RGO incorporating PLL from graphene oxide-L-lysine aqueous dispersion. The fabrication process of Nafion/GOx/ERGO-PLL/GCE has been characterized by cyclic voltammetry and electrochemical impedance spectroscopy, and the surface morphology of modified electrodes were characterized by scanning electron microscopy. A pair of well-defined redox peaks with formal potential and peak separation of - 0.461 V and 30 mV were observed at scan rate of 50 mV s(-1), the electron transfer rate constant was calculated to be 18.7 s(-1), demonstrated that direct electron transfer between immobilized GOx with ERGO-PLL and GCE was achieved. Moreover, the fabricated enzyme biosensor exhibited excellent electrocatalytic activity for determination of glucose in O-2-free PBS (7.40) with linear voltammetric response from 0.005 to 9.0 mu mol L-1, and detection limits (S/N = 3) of 2.0 mu mol L-1. This work indicates that ERGO-PLL based modified electrode is superior to that of graphene based, and could be applied in biosensors, bioelectronics and electrocatalysis, etc.

Application of Polypyrrole/gox Film to Glucose Biosensor Based on Electrochemical-Surface Plasmon Resonance Technique

A glucose oxidase sensor based on screen-printed carbon electrodes modified by polypyrrole.

Glucose Biosensor Based on a Platinum Electrode Modified with Rhodium Nanoparticles and with Glucose Oxidase Immobilized on Gold Nanoparticles

Glucose biosensor based on immobilization of glucose oxidase in poly(o-aminophenol) film on polypyrrole-Pt nanocomposite modified glassy carbon electrode.

An Enzyme-Metal-Insulator-Silicon Structured Sensor Using Surface Photovoltage Technology for Potentiometric Glucose Detection

Needle-shaped glucose sensor based on polypyrrole doped with glucose oxidase

Fabrication of Polypyrrole–glucose Oxidase Biosensor Based on Multilayered Interdigitated Ultramicroelectrode Array with Containing Trenches

Biosensor based on glucose oxidase-nanoporous gold co-catalysis for glucose detection

Properties of Dendrimer‐Encapsulated Pt Nanoparticles Doped Polypyrrole Composite Films and Their Electrocatalytic Activity for Glucose Oxidation

Polypyrrole Nanoflake Array For Glucose Biosensing

Application of hydrophobic palladium nanoparticles for the development of electrochemical glucose biosensor

ELECTROCHEMICAL-BEHAVIOR, APPLICATION AND IMMOBILIZATION OF GLUCOSE-OXIDASE AT NANOMETER-SIZED ULTRAMICROBAND GOLD ELECTRODE

Study of Electrochemical Biosensor for Determination of Glucose Based on Prussian Blue/Gold Nanoparticles-Chitosan Nanocomposite Film Sensing Interface

Multilayer Membranes Via Layer-By-Layer Deposition Of Organic Polymer Protected Prussian Blue Nanoparticles And Glucose Oxidase For Glucose Biosensing

Synergy Effect of Nanocrystalline Cellulose for the Biosensing Detection of Glucose

Bienzymatic Glucose Biosensor Based on Poly(vinyl alcohol)/Titanium Dioxide Hybrid Materials and Carbon Nanotubes-Nanocopper-Modified Glassy Carbon Electrode

Direct Electrochemistry of Glucose Oxidase Based on One Step Electrodeposition of Reduced Graphene Oxide Incorporating Polymerized L-Lysine and Its Application in Glucose Sensing.

Novel Enzymeless Glucose Sensor Based On Overoxidized Polypyrrole Modified Nickel Microelectrode

A Sensitive and Selective Biosensor Activated by Tailor-Designed Platinum Nanoparticles Electrodeposited Onto A Gold Microelectrode

Electrochemically fabricated nanoelectrode ensembles for glucose biosensors

A Stable Glucose Biosensor Prepared by Co-Immobilizing Glucose Oxidase into Poly(p-Chlorophenol) at a Platinum Electrode.