Abstract:The immobilization of glucose oxidase (GOD) via its dip-dry coating on a Prussian blue (PB) modified Au electrode followed by deposition of an outer poly(o-phenylenediamine) (PoPD) film and then glutaraldehyde (GA) cross-linking was investigated for amperometric glucose sensing, based on the reduction of enzymatically generated H2O2 catalyzed by the electroactive PB layer of the PoPD/GOD-GA/PB/Au electrode. The quartz crystal microbalance (QCM) was used to monitor various electrode-modification processes, and the effective enzymatic specific activity (ESA, defined as enzymatic activity per gram of enzyme) of immobilized GOD was estimated based on the mass of immobilized GOD (from QCM) and the quantity of hydrogen peroxide as the product of the enzymatic reaction (from amperometric detection) for the first time. The ESA of native GOD under our experimental conditions was also estimated via amperometric detection of enzymatically generated H2O2 at a PB-modified Au electrode. Effects of various experimental parameters on glucose sensing, including the applied potential, solution pH and electroactive interferents, were investigated. At an optimal potential of −0.05V versus saturated KCl calomel electrode (SCE), the current response of the biosensor in the selected phosphate buffer (pH 7.0) was linear with glucose concentration from 0.05 to 10mmolL−1, with detection limit of 8μmolL−1, short response time (within ∼5s) and good anti-interferent ability. The Michaelis constant (Kmapp) of the immobilized GOD was estimated as 19.6mmolL−1. The biosensor exhibited good storage stability, i.e., 88% of its initial response was retained after 30-day storage in pH 7.0 phosphate buffer at 4°C. Since the present sensor-fabrication platform is rather general and advantageous in saving biochemical reagents, it is recommended for the development of other biosensors based on other substrate electrode materials, e.g. glassy carbon that has been tested in this work with satisfactory results.

Amperometric Glucose Sensor Based on Coimmobilization of Glucose Oxidase and Poly(p-phenylenediamine) at a Platinum Microdisk Electrode

A glucose oxidase sensor based on screen-printed carbon electrodes modified by polypyrrole.

Glucose Biosensor Based on Immobilization of Glucose Oxidase in Electrochemically Polymerized Polytyramine Film and Overoxidised Polypyrrole Film on Platinized Carbon Paste Electrode

Amperometric glucose sensor based on glucose oxidase immobilized in electrochemically generated poly(ethacridine)

Glucose biosensor based on immobilization of glucose oxidase in poly(o-aminophenol) film on polypyrrole-Pt nanocomposite modified glassy carbon electrode.

A Stable Glucose Biosensor Prepared by Co-Immobilizing Glucose Oxidase into Poly(p-Chlorophenol) at a Platinum Electrode.

New Glucose Biosensor Based on a Poly(o-Phenylendiamine)/glucose Oxidase-Glutaraldehyde/prussian Blue/au Electrode with QCM Monitoring of Various Electrode-Surface Modifications

An Amperometric Glucose Biosensor Based On Poly(O-Aminophenol) And Prussian Blue Films At Platinum Electrode

An Amperometric Glucose Biosensor Based on Glucose Oxidase Immobilized in Electropolymerized Poly(o-aminophenol) and Carbon Nanotubes Composite Film on a Gold Electrode

An Enzyme-Metal-Insulator-Silicon Structured Sensor Using Surface Photovoltage Technology for Potentiometric Glucose Detection

Amperometric Biosensor for Glucose Based on a Nanometer-Sized Microband Gold Electrode Coimmobilized with Glucose Oxidase and Poly(o-phenylenediamide)

Amperometric Biosensor for Glucose Based on Electropolymerized Tetraaminophthalocyanatocobalt(Ii) and Phenol Films

An Amperometric Biosensor for Glucose Based on Electrodeposited Redox Polymer/Glucose Oxidase Film on a Gold Electrode

Poly(phenylenediamine) Film for the Construction of Glucose Biosensors Based on Platinized Glassy Carbon Electrode

Glucose Biosensor Based on Poly(methylene Blue)and Au Colloid Modified Glassy Carbon Electrode

Integrating Ultrathin Polypyrrole Framework On Nickel-Cobalt Layered Double Hydroxide As An Amperometric Sensor For Non-Enzymatic Glucose Determination

Amperometric glucose biosensor based on gold-deposited polyvinylferrocene film on Pt electrode

An Amperometric Biosensor Based on Glucose Oxidase Immobilized in A Sol-Gel Polyvinyl Alcohol/Silica Hybrid Composite Film on A Prussian Blue Modified Electrode

Development of an amperometric glucose biosensor based on the immobilization of glucose oxidase in an ormosil-PVA matrix onto a Prussian Blue modified electrode

Palygorskite-poly(o-phenylenediamine) Nanocomposite: an Enhanced Electrochemical Platform for Glucose Biosensing

An amperometric biosensor for glucose based on self-assembling nanoparticles and electrosynthesis of poly-o-diaminobenzene on the Prussian blue-modified gold electrode