Abstract:Electrodeposition of Pt-Pb nanoparticles (PtPbNPs) to multi-walled carbon nanotubes (MWCNTs) resulted in a stable PtPbNP/MWCNT nanocomposite with high electrocatalytic activity to glucose oxidation in either neutral or alkaline medium. More importantly, the nanocomposite electrode with a slight modification exhibited high sensitivity, high selectivity, and low detection limit in amperometric glucose sensing at physiological neutral pH (poised at a negative potential). At +0.30 V in neutral solution, the nanocomposite electrode exhibited linearity up to 11 mM of glucose with a sensitivity of 17.8 microA cm(-2) mM(-1) and a detection limit of 1.8 microM (S/N=3). Electroactive ascorbic acid (0.1 mM), uric acid (0.1 mM) and fructose (0.3 mM) invoked only 23%, 14% and 9%, respectively, of the current response obtained for 3 mM glucose. At -0.15 V in neutral solution, the electrode responded linearly to glucose up to 5 mM with a detection limit of 0.16 mM (S/N=3) and detection sensitivity of approximately 18 microA cm(-2) mM(-1). At this negative potential, ascorbic acid, uric acid, and fructose were not electroactive, therefore, not interfering with glucose sensing. Modification of the nanocomposite electrode with Nafion coating followed by electrodeposition of a second layer of PtPbNPs on the Nafion coated PtPbNP/MWCNT nanocomposite produced a glucose sensor (poised at -0.15 V) with a lower detection limit (7.0 microM at S/N=3) and comparable sensitivity, selectivity and linearity compared to the PtPbNP/MWCNT nanocomposite. The Nafion coating lowered the detection limit by reducing the background noise, while the second layer of PtPbNPs restored the sensitivity to the level before Nafion coating.

Improved Sensitivity and Selectivity Glucose Biosensor Based on PANI-GRA Nanocomposite Film Decorated with Pt Nanoparticles

Development of glucose biosensors based on nanostructured graphene-conducting polyaniline composite.

3D Porous Structured Polyaniline/reduced Graphene Oxide/copper Oxide Decorated Electrode for High Performance Nonenzymatic Glucose Detection

Glucose biosensor based on platinum microparticles dispersed in nano-fibrous polyaniline.

The Micro Network of Polyacrylonitrile (Pan)-Polyaniline (Pani)-Graphene (GRA) Hybrid Nanocomposites for Effective Electrochemical Detection of Glucose and Improved Stability

Highly Selective and Stable Glucose Biosensor Based on Incorporation of Platinum Nanoparticles into Polyaniline-Montmorillonite Hybrid Composites

Improved Selectivity and Stability of Glucose Biosensor Based on in Situ Electropolymerized Polyaniline-Polyacrylonitrile Composite Film.

A new amperometric glucose biosensor based on platinum nanoparticles/polymerized ionic liquid-carbon nanotubes nanocomposites

In situ chemo-synthesized multi-wall carbon nanotube-conductive polyaniline nanocomposites: characterization and application for a glucose amperometric biosensor.

Platinum Nanoparticle Modified Polyaniline-Functionalized Boron Nitride Nanotubes for Amperometric Glucose Enzyme Biosensor.

Glucose Biosensor Based on Au Nanoparticles–conductive Polyaniline Nanocomposite

Dendrimer‐encapsulated Pt Nanoparticles/polyaniline Nanofibers for Glucose Detection

Amperometric Biosensor Based on Carbon Nanotubes Coated with Polyaniline/ Dendrimer-Encapsulated Pt Nanoparticles for Glucose Detection

The Application Of Platinum Modified Superfine-Fibrous Polyaniline In Glucose Biosensors

Highly Sensitive Glucose Sensor Based on Pt Nanoparticle/polyaniline Hydrogel Heterostructures.

Dispersed Conducting Polymer Nanocomposites with Glucose Oxidase and Gold Nanoparticles for the Design of Enzymatic Glucose Biosensors

Selective and sensitive electrochemical detection of glucose in neutral solution using platinum-lead alloy nanoparticle/carbon nanotube nanocomposites.

Glucose Biosensor from Covalent Immobilization of Chitosan-Coupled Carbon Nanotubes on Polyaniline-Modified Gold Electrode.

Glucose biosensor based on Pt nanoparticles modified aligned carbon nanotubes electrode

Pt Nanoparticles Inserting in Carbon Nanotube Arrays: Nanocomposites for Glucose Biosensors

Glucose biosensor based on immobilization of glucose oxidase in poly(o-aminophenol) film on polypyrrole-Pt nanocomposite modified glassy carbon electrode.