Abstract:Highlights • The convection in the Cu pattern surface increase with the Cu layer thickness. • The mechanism of Cu layer improvement under high current density was explained. • The adsorption model of the convection-dependent additives during the high current density Cu pattern electroplating process was proposed. • The Cu pattern with excellent properties was electroplated under a current density of 8 ASD with an ultra-high rate of over 90 μm/h. Background Cu pattern electroplating plays an essential role in the interconnection and microstructure fabrication of high-power device packaging. However, improving efficiency while ensuring the preparation quality is an urgent breakthrough direction. Methods A new electrolyte formula suitable for the high-rate Cu pattern electroplating was put forward, including 300 mg/L polyethylene glycol (PEG, molecular weight=8000) and 6 mg/L thiazolinyl polydipropyl sulfonate (SH110). The mechanism of high-rate Cu pattern electroplating was investigated by the combination of fluid flow simulation and the electrochemical measurements including galvanostatic measurements (GMs) and cyclic voltametric (CV) tests. The Cu pattern was electroplated in the Haring-Cell with air bubble as the forced convection method. Significant findings The simulation results indicate that the flow rate on the ring-shaped cathodic pattern surface gradually increases with the Cu growing up, which also increase from the pattern surface to the bulk electrolyte. The GMs results suggest that the cathodic polarization of the convection-dependent additives raises with the current density, which is strengthened by strong convection with current density lower than 6 ASD but have the opposite effect with current density larger than 8 ASD. The CV tests indicating that the aggregation of weak convection and strong polarization promote the antagonistic effect between thiolate of SH110 and PEG, the nucleation and the electroplating rate. Nevertheless, the synergistic effect of thiazoline of SH110 and PEG are enhanced with strong convection and weak polarization. The adsorption model during the Cu pattern electroplating process is established and verified by electroplating experiment with the optimum current density of 8 ASD. The Cu pattern is mirror bright with the high electroplating rate of over 90 μm/h. Graphical abstract Download : Download high-res image (160KB) Download : Download full-size image

Continuous High-Speed Spot Silver Plating Process

Study on electroplating waste water treatment process

Effect of the post-treatment in cyanide-free silver plating on the surface condition of the plated layer

Study of Non-cyanide Silver Plating and Mechanism under Influence of Ultrasonic

Analysis of Discoloration Mechanism for Electrical Equipment Silver-Plated Surface and Processing

Practices of lead-silver anode plate production

The Problem of International Acidic Immersion Silver and the New Weak Alkaline Immersion Silver IAG-377 Process

Investigation of Partial Silver-Plating in Electronic Packaging

Novel Electroless Nickel Plating Process

Improvement on pretreatment process for electroplating silver on beryllium-bronze parts

Optimizing The Electroplating Condition Of An Acid Low Cyanide Silver Bath And Its Application In Micromachining

Removal of Heavy Metals from Electroplating Sludge by Electrokinetic Enhancement Technology

Cleaning Technology for Continuous Electroless Plating

Zinc-nickel alloy electroplating process

Experimental study on the treatment of highly concentrated electroplating nickel-containing waste liquid by electrolytic method

A Combined Theoretical and Experimental Study for Silver Electroplating

Application of Copper Masking Agent in Continuous Nickel Plating

A continuous electroplating model for poorly conductive substrates

Combined fluid flow simulation with electrochemical measurement for mechanism investigation of high-rate Cu pattern electroplating

Effect of pulse electroplating parameters on the morphology and corrosion resistance of Ag plating coating

Study on new process of electroless copper plating pretreatment on carbon fiber surface