Abstract:The pollution of wastewater with hazardous heavy metals has become one of the most important worldwide environmental problems. In the electroplating industry, large amounts of discharge of untreated dilute rinse wastewater combined with increasingly stringent pollutant emission standards have limited the sustainable development of the electroplating industry. In this study, a novel integrated two-stage electrodeionization (EDI) process for recovering Ni2+ and pure water to reduce pollutant emissions in the electroplating industry was evaluated using a simulated nickel-electroplating rinse wastewater. Based on the characteristic curves, the appropriate operating voltage was determined to be 15 V for the first stage, while the second stage voltage was set at 25 V. The integrated two-stage EDI process removed more than 99.8% of the Ni2+ from the simulated electroplating rinse wastewater, eliminating 94% of the Ni2+ from the feed water (Ni2+ concentration of 50 mg L-1) in the first stage and approximately 96.7% of the remaining Ni2+ in the second stage. Additionally, a closed-circuit circulation of the concentrate stream was used to achieve the solution with Ni2+ concentration as high as 11,031 mg L-1. Pure water with resistivity value exceeding 1.6 M Omega cm was produced by extensive purification during the second stage and was able to be reused as make-up process water. With a treatment capacity of 1.0 m(3) h(-1), the integrated two-stage EDI process may be able to annually reduce wastewater discharge amounts of 7200 m(3) and sludge disposal values of 12.8 tons, generating annual profit of 208,400 Yuan RMB, comparing favorably with existing chemical precipitation process. These results for the treatment of electroplating rinse wastewater suggest that this integrated two-stage EDI process may be economically beneficial with improved environmental benefits. (C) 2014 Elsevier Ltd. All rights reserved.

Experimental study on the treatment of highly concentrated electroplating nickel-containing waste liquid by electrolytic method

A Comparative Study Of Nickel(Ii) Removal From Electroplating Wastewater By Pre-Precipitation Combined With Fenton-Precipitation Or Fenton-Like-Precipitation

Recovery of Nickel by Electrolytic Method from Electroplating Wastewater

Recovery of nickel from electroless nickel plating wastewater based on the synergy of electrocatalytic oxidation and electrodeposition technology

Recovery of Precious Metal Material Ni from Nickel Containing Wastewater Using Electrolysis

Recovery of Nickel from Actual Electroplating Wastewater by Integrated Electrodeposition with Adsorption Pretreatment Technique

Micro-electrolysis Treatment of Simulated Electroplating Wastewater Containing Nickel Ions

Electrochemical reactor with rotating cylinder electrode for optimum electrochemical recovery of nickel from plating rinsing effluents

Highly efficient nickel recovery from industrial wastewater via synergistic electrodeposition and electrocatalytic oxidation technique

Recovery of Ni(II) from Real Electroplating Wastewater Using Fixed-Bed Resin Adsorption and Subsequent Electrodeposition

Removal of low concentrations of nickel ions in electroplating wastewater by combination of electrodialysis and electrodeposition

Removal of Nickel from Spent Electroless Nickel-Plating Bath with Nickel Foam Cathode

Treatment of Electroplating Wastewater Containing Nickel by Fenton Oxidation-Ferrite Process

Removal of Heavy Metals from Electroplating Sludge by Electrokinetic Enhancement Technology

Recovery of spent electroless nickel plating bath by electrodialysis

Recovery of Nickel and Water from Wastewater with Electrochemical Combination Process

Recovery Process of Nitric Acid, Copper and Nickel in Deplating Wastewater

Status and Prospect of the Methods for Treating Spent Electroless Nickel Plating Baths

Approaches to Enhancing Cathodic Nickel Recovery from Ni-EDTA Containing Synthetic Wastewaters

Recovery of Ni2+ and Pure Water from Electroplating Rinse Wastewater by an Integrated Two-Stage Electrodeionization Process

Present Status and Progress in the Treatment of Electroless Nickel Plating Wastewater