Abstract:In this paper, biodiesel wastewater was treated by catalytic combustion in the case of catalyst coupling. The effects of reaction temperature, residence time and air flow on the treatment of biodiesel wastewater were investigated using the Fe2O3 catalyst, the Pt/Al2O3@cordierite catalyst and the Fe2O3 catalyst coupled with the Pt-based catalyst. The effects of high-temperature hydrothermal treatment on the two catalysts were evaluated. The catalytic stability was studied in continuous catalytic combustion. Detailed characterization of the two catalysts was carried out. The X-ray fluorescence (XRF), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) characterization demonstrated that the Fe2O3 catalyst contained a significant amount of surface active oxygen and Fe2O3 existed in an amorphous form within the catalyst. The Fe2O3 catalyst could remove 90.6% of sulfur from wastewater, showing excellent desulfurization performance, but it was not resistant to high temperature. After 500 degrees C hydrothermal treatment, the chemical oxygen demand (COD) removal rate decreased significantly from 97.98% to 69.04% at the reaction temperature of 280 degrees C. The COD removal rate of the Pt/Al2O3@cordierite catalyst was almost 100% at the reaction temperature of 320 degrees C, with the activity being basically unchanged after high-temperature hydrothermal treatment, but sulfur poisoning occurred. The Fe2O3 catalyst coupled with the Pt/Al2O3@cordierite catalyst showed excellent catalytic activity and stability, and the optimal reaction temperature and residence time were 320 degrees C and 0.3 s, respectively. In the continuous treatment of biodiesel wastewater with the COD of 99 465 mg L-1 for 200 h, the COD and sulfur content of the treated wastewater were less than 400 mg L-1 and 1 mg L-1, with the COD removal rate and sulfur removal rate exceeding 99.62% and 81.38%, respectively. In addition, no organic gas or SO2 was detected in the exhaust gas generated during the reaction, and the removed organic matter was converted into CO2 and H2O.

Treatment of sorbic acid production wastewater by catalytic wet air oxidation

Electrochemical Oxidation of Chemi-Thermo-mechanical Pulping Wastewater

Study on Catalyst of Catalytic Wet Oxidation of Sorbic Acid Industrial Wastewater

Highly Efficient Degradation of Pharmaceutical Sludge by Catalytic Wet Oxidation Using CuO-CeO2/γ-Al2O3 As a Catalyst

Application of catalytic wet air oxidation for the treatment of H-acid manufacturing process wastewater

Treatment of H-acid industrial wastewater by catalytic wet oxidation

Wet air oxidation treatment of H-acid wastewater

STUDY ON DEVELOPING WASTEWATER PRETREATMENT BY CATALYTIC WET AIR OXIDATION

Catalytic Wet Air Oxidation of Ochlorophenol in Wastewater

Catalytic Combustion of Biodiesel Wastewater over the Fe2O3 Catalyst Coupled with a Pt-based Catalyst

Effect of inorganic salt on the removal of typical pollutants in wastewater by RuO 2 /TiO 2 via catalytic wet air oxidation

Pretreatment of Wastewater in Amine C Acid Manufacture by Coagulation-Catalytic Oxidation

Efficient Treatment of High-Concentration Sulfurous Wastewater by Using Electrochemical Oxidation Process with Ti/SnO2–Sb Anode and Air Cathode

Efficient Treatment of Biodiesel Wastewater by Catalytic Combustion

Base-metal Oxide Semiconductor Electrodes for PPCP Degradation: Ti-doped Α-Fe2o3 for Sulfosalicylic Acid Oxidation As an Example.

Treatment of alkaline wastewater from synthetic rubber production by coagulation and biological contact oxidation

Catalytic oxidative treatment of wastewater containing H acid with chlorine dioxide

Catalytic ozonation of hard COD in coking wastewater with Fe2O3/Al2O3-SiC: From catalyst design to industrial application

Efficient advanced treatment of coking wastewater using O3/H2O2/Fe-shavings process

Treatment of Desizing Wastewater Containing Poly(Vinyl Alcohol) by Wet Air Oxidation

Pretreatment of Apramycin Wastewater by Catalytic Wet Air Oxidation.