Abstract:The treatment of high-salinity and high-organic wastewater is a tough task, with the removal of organic matter and the separation of salts often mutually restricting. Catalytic wet air oxidation (CWAO) coupled desalination technology (membrane distillation (MD), membrane bioreactor (MBR), ultrafiltration (UF), nanofiltration (NF), etc.) provides an effective method to simultaneously degrade the high-salinity (via desalination) and high-organic matters (via CWAO) in wastewater. In this work, five kinds of RuO 2 /TiO 2 catalysts with different calcination temperatures were prepared for CWAO of maleic acid wastewater with a theoretical chemical oxygen demand (COD) value of 20,000 mg L −1 . RuO 2 /TiO 2 series catalysts demonstrated prominent salt resistance, with more than 80% TOC removal rates in the CWAO system containing 5 wt% Na 2 SO 4 ; while RuO 2 /TiO 2 -350 showed the best degradation performance in both non-salinity and Na 2 SO 4 -containing conditions. Multiple characterization techniques, such as XRD, BET, XPS, NH 3 -TPD and TEM etc., verified the physicochemical structure of RuO 2 /TiO 2 catalysts, and their influence on the degradation of pollutants. The calcination temperature was found to have a direct impact on the specific surface area, pore volume, oxygen vacancies and acid sites of catalysts, which in turn affected the ultimate catalytic activity. Furthermore, we also investigated the performance of the RuO 2 /TiO 2 -350 catalyst for the treatment of acids, alcohols and aromatic compounds with the addition of NaCl or Na 2 SO 4 , proving its good universality and excellent salt resistance in saline wastewater. Meanwhile, the relationship between the structure of three types of organic compounds and the degradation effect in the CWAO system was also explored.

Study on Catalyst of Catalytic Wet Oxidation of Sorbic Acid Industrial Wastewater

Treatment of sorbic acid production wastewater by catalytic wet air oxidation

Study and optimization of catalytic oxidation technology in spent caustic desulfurization

Highly Efficient Degradation of Pharmaceutical Sludge by Catalytic Wet Oxidation Using CuO-CeO2/γ-Al2O3 As a Catalyst

Catalytic Wet Oxidation of Pharmaceutical Sludge by Molecular Sieve Loaded with Cu/Ce

Spherical Cu2O-Fe3O4@chitosan Bifunctional Catalyst for Coupled Cr-organic Complex Oxidation and Cr(VI) Capture-Reduction

STUDY ON DEVELOPING WASTEWATER PRETREATMENT BY CATALYTIC WET AIR OXIDATION

Application of catalytic wet air oxidation for the treatment of H-acid manufacturing process wastewater

Catalytic ozonation of hard COD in coking wastewater with Fe2O3/Al2O3-SiC: From catalyst design to industrial application

Preparation and Performance of Cu Based Catalyst on Stainless Steel Wire Mesh

Catalytic Ozonation with Carbon-Coated Copper-based Core-shell Catalysts (C/Cu-Al2O3) for the Treatment of High-Salt Petrochemical Wastewater

Research on catalysts for catalytic wet air oxidation process and treatment technologies

Study on Heterogeneous Catalysts for Catalytic Wet Oxidation

Research on catalytic ozonation for advanced treatment of coking wastewater

Treatment of H-acid industrial wastewater by catalytic wet oxidation

Preparation of Cu-Mn/Fe3O4@SiO2@KCC Nanocatalyst and Its Application in Catalytic Ozonation for Degradation of Terephthalic Acid

Effect of inorganic salt on the removal of typical pollutants in wastewater by RuO 2 /TiO 2 via catalytic wet air oxidation

Study on Catalysis Oxidation Treatment of Dye Intermediate Wastewater of C Acid

Study on Heterogeneous Catalyst Classification Based on CWAO Process of Organic Waste-Water

Catalytic Wet Air Oxidation of Ochlorophenol in Wastewater

Catalysis of CuO on degradation of organic substance in Bayer liquid