Abstract:In this paper, Ce-modified Cu-based carbon materials (Cu-Ce/AC) were prepared by impregnation method using walnut shell as the carbon precursor, Cu-ammonia solution as Cu source and Ce as modifier. The catalytic wet air oxidation (CWAO) degradation of phenol wastewater was carried out in a self-assembled fixed-bed reactor. The stability of Cu-Ce/AC catalyst under different pH conditions was studied. This study combines XRD, BET, FT-IR, ICP-OES and XPS characterization techniques to study the main reasons for the deactivation of Cu-Ce/AC catalysts. The reaction mechanism of Cu-Ce/AC catalytic wet air oxidation degradation of phenol was clarified. The result indicates that although phenol was completely converted in the CWAO process, the acidic intermediate product produced were difficult to completely degraded. Therefore, the pH of the solution gradually decreased. In acidic environment, the interaction between active component Cu and carbon carrier is weak, resulting in a large amount of metal leaching into the solution. As a result, the COD conversion gradually decreases. The alkaline environment can effectively slow down the leaching of catalyst Cu while maintaining its high catalytic activity. In addition, the incompletely degraded intermediate products are easy to accumulate and deposit on the Cu-Ce/AC surface, block the micropores and cover the surface-active sites, which reduces the catalyst activity. The study also found that there is a redox cycle between Cu+, Cu2+ Ce3+ and Ce4+ during phenol degradation, which enables Cu and Ce to form a strong interaction. The redox cycle can also promote the formation of oxygen vacancy (h+), O2−·, and HO·, making the degradation of phenol more thorough. At the same time, the mutual conversion between metal lattice oxygen and surface chemisorbed oxygen can generate high concentration of oxygen defect sites, which can improve the oxygen storage capacity of Cu-Ce/AC. These oxygen vacancies also provide more reactive sites to further promote adsorption and catalytic oxidation degradation of phenol and intermediate products.

Catalytic Wet Oxidation of Pharmaceutical Sludge by Molecular Sieve Loaded with Cu/Ce

Highly Efficient Degradation of Pharmaceutical Sludge by Catalytic Wet Oxidation Using CuO-CeO2/γ-Al2O3 As a Catalyst

The Catalytic Wet Oxidation of Excess Activated Sludge from a Coal Chemical Wastewater Treatment Process

Activation of Peroxymonosulfate by CoS2 Loaded Air-Laid Cloth for Rapid Degradation of Organic Pollutants in a Shallow Continuous Flow Reactor

Catalytic air oxidation of biogas slurry using Cu sub-nanocluster supported by mesoporous TiZrO 4 and protected by SiO 2 shell

Catalytic Air Oxidation of Biogas Slurry Using Cu Sub-Nanocluster Supported by Mesoporous TiZrO4 and Protected by SiO2 Shell

Fabrication of MnOx heterogeneous catalysts from wet sludge for degradation of azo dyes by activated peroxymonosulfate

Boosting peroxymonosulfate activation via Fe–Cu bimetallic hollow nanoreactor derived from copper smelting slag for efficient degradation of organics: The dual role of Cu

Catalytic Wet Air Oxidation of Sewage Sludge: A Review

Highly stable and efficient calcined γ-Al2O3 catalysts loaded with MnOx-CeOx for the ozonation of oxytetracycline

Catalytic Ozonation Treatment of Polar Antibiotics with Cu-Ce Modified Γ-Al2o3 Catalysts: Ph Effects and Removal Mechanism

The synthesis of heterogeneous Fenton-like catalyst using sewage sludge biochar and its application for ciprofloxacin degradation.

Catalytic ozonation of sulfamethazine antibiotics using Ce0.1Fe0.9OOH: Catalyst preparation and performance

Convenient fabrication of ultrafine VOx decorated on porous g-C3N4 for boosting photocatalytic degradation of pharmaceuticals with peroxymonosulfate

Experimental Study on the Catalytic Supercritical Water Oxidation of Oilfield Sludge

High-performance Cu/Mn modified ceramsite as a persulfate activator to degrade oxytetracycline in batch Erlenmeyer flask and continuous-flow fixed-bed column systems: An exploration of its practicability and non-radical mechanisms

Catalytic Ozonation with Carbon-Coated Copper-based Core-shell Catalysts (C/Cu-Al2O3) for the Treatment of High-Salt Petrochemical Wastewater

Wet Oxidation of Excess Activated Sludge from Coal Chemical Industry

Copper slag based catalytic material was prepared using a one-pot method to efficiently activate of peroxymonosulfate for degradation of carbamazepine

Catalysis of CuO on degradation of organic substance in Bayer liquid

Deactivation characteristics of Ce-modified Cu-based carbon materials for catalytic wet air oxidation of phenol wastewater