Abstract:In this paper, Ce-modified Cu-based carbon materials (Cu-Ce/AC) were prepared by impregnation method using walnut shell as the carbon precursor, Cu-ammonia solution as Cu source and Ce as modifier. The catalytic wet air oxidation (CWAO) degradation of phenol wastewater was carried out in a self-assembled fixed-bed reactor. The stability of Cu-Ce/AC catalyst under different pH conditions was studied. This study combines XRD, BET, FT-IR, ICP-OES and XPS characterization techniques to study the main reasons for the deactivation of Cu-Ce/AC catalysts. The reaction mechanism of Cu-Ce/AC catalytic wet air oxidation degradation of phenol was clarified. The result indicates that although phenol was completely converted in the CWAO process, the acidic intermediate product produced were difficult to completely degraded. Therefore, the pH of the solution gradually decreased. In acidic environment, the interaction between active component Cu and carbon carrier is weak, resulting in a large amount of metal leaching into the solution. As a result, the COD conversion gradually decreases. The alkaline environment can effectively slow down the leaching of catalyst Cu while maintaining its high catalytic activity. In addition, the incompletely degraded intermediate products are easy to accumulate and deposit on the Cu-Ce/AC surface, block the micropores and cover the surface-active sites, which reduces the catalyst activity. The study also found that there is a redox cycle between Cu+, Cu2+ Ce3+ and Ce4+ during phenol degradation, which enables Cu and Ce to form a strong interaction. The redox cycle can also promote the formation of oxygen vacancy (h+), O2−·, and HO·, making the degradation of phenol more thorough. At the same time, the mutual conversion between metal lattice oxygen and surface chemisorbed oxygen can generate high concentration of oxygen defect sites, which can improve the oxygen storage capacity of Cu-Ce/AC. These oxygen vacancies also provide more reactive sites to further promote adsorption and catalytic oxidation degradation of phenol and intermediate products.

Research on catalysts for catalytic wet air oxidation process and treatment technologies

Application of catalytic wet air oxidation for the treatment of H-acid manufacturing process wastewater

Highly Efficient Degradation of Pharmaceutical Sludge by Catalytic Wet Oxidation Using CuO-CeO2/γ-Al2O3 As a Catalyst

Catalytic Combustion of VOCs on Pt/CuMnCe and Pt/CeY Honeycomb Monolithic Catalysts

Facile and Flexible Preparation of Highly Active CuCe Monolithic Catalysts for VOCs Combustion

Advances in Research on Wastewater Treatment by Catalytic Wet Air Oxidation Process

Preparation and Performance of Cu Based Catalyst on Stainless Steel Wire Mesh

Catalytic Wet Air Oxidation of Toxic Containments over Highly Dispersed Cu(II)/Cu(I)-N Species in the Framework of G-C3n4.

Study on Catalyst of Catalytic Wet Oxidation of Sorbic Acid Industrial Wastewater

Preparation of VOC low-temperature oxidation catalysts with copper and iron binary metal oxides via hydrotalcite-like precursors

Study on catalytic wet air oxidation of acetic acid by ZrxCe1-xO2 catalyst

Catalytic Wet Air Oxidation of Phenols over Porous Plate Cu-based Catalysts

Deactivation characteristics of Ce-modified Cu-based carbon materials for catalytic wet air oxidation of phenol wastewater

Study on Heterogeneous Catalyst Classification Based on CWAO Process of Organic Waste-Water

Co3O4‐Based Catalysts for the Low‐Temperature Catalytic Oxidation of VOCs

Research on catalytic ozonation for advanced treatment of coking wastewater

Catalytic Ozonation with Carbon-Coated Copper-based Core-shell Catalysts (C/Cu-Al2O3) for the Treatment of High-Salt Petrochemical Wastewater

The Surface Properties and the Activities in Catalytic Wet Air Oxidation over CeO2–TiO2 Catalysts

Treatment of sorbic acid production wastewater by catalytic wet air oxidation

g‐C3N4 Coating Enhanced Cu@AC for Catalytic Wet Air Oxidation of Phenol under Mild Conditions

Synergistic Effects Between Copper and Tungsten on the Structural and Acidic Properties of CuOx/WOx–ZrO2 Catalyst